Whether in the wc or in a pool, it sometimes happens that the Motorola Moto G32 is dropped in the water. Nonetheless, it isn’t because a phone has fallen in the water that it is inevitably dead. Indeed, it is feasible to redo an Motorola Moto G32 that has fallen in the water. To achieve this, it is essential to respect particular actions. People often have bad reflexes and this is what can deteriorate the Motorola Moto G32. We will first discover the techniques to be taken after the Motorola Moto G32 has fallen into the water. We will discover in the secondary place the classical errors that most people make.
Methods to follow if your Motorola Moto G32 fell into the water
If you want to restore your Motorola Moto G32 in working order, we suggest that you follow the steps listed below.
Do not attempt to turn the Motorola Moto G32 back on after getting out the water
One thing to accomplish when the Motorola Moto G32 has fallen into the water is to turn off the phone. Indeed, if it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Motorola Moto G32 is started and wet, you may create a short circuit and therefore toast the phone.
Remove detachable components
Once the Motorola Moto G32 is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will probably be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Motorola Moto G32
Using a straw, you will need to suck up the water that is contained in your Motorola Moto G32. For doing it, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Moto G32, you will be able to start drying it.
Dry the Motorola Moto G32
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. Once it is completed, we suggest you to leave the Motorola Moto G32 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Motorola Moto G32.
Reassemble the components and turn on the Motorola Moto G32
When you have completed the previous steps, your Motorola Moto G32 should be dry. So now you can try to turn on the Motorola Moto G32. If perhaps this doesn’t do the job, we suggest you to wait a few days or to bring the Motorola Moto G32 to a repairman.
What should not be done if the Motorola Moto G32 has fallen into the water
There are a number of points not to accomplish when your Motorola Moto G32 has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the Motorola Moto G32. Next, it is strongly advised not to use a heat source to dry the Motorola Moto G32. Without a doubt, methods which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could as well ruin the Motorola Moto G32.
