Whether in the toilet or in a swimming pool, it occasionally occurs that the Motorola Droid RAZR is slipped in the water. On the other hand, it is not simply because a cellphone has fallen in the water that it’s obviously dead. In fact, it is feasible to redo an Motorola Droid RAZR that has fallen in the water. To accomplish this, it is important to respect specific actions. People typically have bad reflexes and this is what can degrade the Motorola Droid RAZR. We will 1st see the methods to be taken after the Motorola Droid RAZR has fallen into the water. We will see in the second place the common mistakes that many people make.
Steps to follow if your Motorola Droid RAZR fell into the water
In the event that you need to restore your Motorola Droid RAZR in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Motorola Droid RAZR back on after getting out the water
The very first thing to do when the Motorola Droid RAZR has fallen into the water is to shut off the cellphone. In fact, if it did not switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Motorola Droid RAZR is started and wet, you can create a short circuit and therefore toast the cellphone.
Remove detachable components
Once the Motorola Droid RAZR is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be important to remove the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Motorola Droid RAZR
Employing a straw, you must suck up the water that is contained in your Motorola Droid RAZR. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Motorola Droid RAZR, you will be ready to start drying it.
Dry the Motorola Droid RAZR
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using procédures that cause the cellphone to heat up or damage the cellphone. Once it is completed, we recommend you to leave the Motorola Droid RAZR in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Motorola Droid RAZR.
Reassemble the components and turn on the Motorola Droid RAZR
When you have completed the prior steps, your Motorola Droid RAZR should be dry. So now you can try to turn on the Motorola Droid RAZR. If perhaps this doesn’t do the job, we recommend you to hang on a few days or to bring the Motorola Droid RAZR to a repairman.
What should not be done if the Motorola Droid RAZR has fallen into the water
There are several stuff not to do when your Motorola Droid RAZR has fallen into the water. The 1st is to try to turn the cellphone back on just after. This can kill the Motorola Droid RAZR. Next, it is highly advised not to use a heat source to dry the Motorola Droid RAZR. Without a doubt, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the cellphone, do not shake it. In fact, it could as well damage the Motorola Droid RAZR.
