Whether in the toilet or in a pool, it from time to time happens that the LG Class is dropped into the water. Nevertheless, it is not simply because a phone has fallen into the water that it’s undoubtedly dead. In fact, it is possible to redo an LG Class that has fallen into the water. To accomplish this, it is important to respect certain actions. People typically have bad reflexes and this is what can damage the LG Class. We will first discover the methods to be taken after the LG Class has fallen into the water. We will discover in the second place the classical errors that most people make.
Steps to follow if your LG Class fell into the water
If you need to recover your LG Class in working order, we recommend that you follow the steps listed below.
Don’t attempt to turn the LG Class back on after getting out the water
The very first thing to do when the LG Class has fallen into the water is to switch off the phone. In fact, if it did not turn off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the LG Class is switched on and wet, you can make a short circuit and as a result toast the phone.
Remove detachable components
Once the LG Class is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these items to dry and continue to the next step.
Aspire the water that is in your LG Class
Employing a straw, you must suck up the water that is contained in your LG Class. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your LG Class, you will be ready to start drying it.
Dry the LG Class
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. Once it is done, we suggest you to leave the LG Class in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the LG Class.
Reassemble the components and turn on the LG Class
When you have completed the previous steps, your LG Class should be dry. So now you can try to turn on the LG Class. If this does not work, we suggest you to wait a couple of days or to bring the LG Class to a repairshop.
What should not be done if the LG Class has fallen into the water
You will find a number of stuff not to do when ever your LG Class has fallen into the water. The first is to try to turn the phone back on just after. This can destroy the LG Class. Next, it is strongly suggested not to use a heat source to dry the LG Class. In fact, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could likewise damage the LG Class.
