Whether in the toilet or in a pool, it sometimes occurs that the Lava Z41 is slipped into the water. On the other hand, it is not simply because a telephone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an Lava Z41 that has fallen into the water. To achieve this, it is required to respect specific steps. People generally have bad reflexes and this is what can degrade the Lava Z41. We will first of all see the steps to be taken after the Lava Z41 has fallen into the water. We will see in the second place the classical mistakes that the majority of people make.
Steps to follow in cases where your Lava Z41 fell into the water
In the event that you desire to restore your Lava Z41 in operating order, we suggest that you follow the steps below.
Don’t try to turn the Lava Z41 back on after exiting the water
One thing to accomplish when the Lava Z41 has fallen into the water is to switch off the telephone. In fact, in cases where it didn’t turn off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Lava Z41 is switched on and wet, you may generate a short circuit and therefore toast the telephone.
Remove detachable components
Once the Lava Z41 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it’ll be required to remove the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Lava Z41
By using a straw, you must suck up the water that is contained in your Lava Z41. For doing it, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Lava Z41, you will have the capacity to start drying it.
Dry the Lava Z41
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the telephone to heat up or damage the telephone. Once it is finished, we advise you to leave the Lava Z41 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Lava Z41.
Reassemble the components and turn on the Lava Z41
When you have completed the prior steps, your Lava Z41 should be dry. So now you can make an attempt to turn on the Lava Z41. If this doesn’t perform, we advise you to hang on a couple of days or to bring the Lava Z41 to a repairshop.
What should not be done in cases where the Lava Z41 has fallen into the water
You will find several stuff not to accomplish when ever your Lava Z41 has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Lava Z41. Next, it is highly advised not to use a heat source to dry the Lava Z41. Indeed, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could likewise ruin the Lava Z41.
