Whether in the wc or in a pool, it occasionally occurs that the Kazam is dropped into the water. Nonetheless, it’s not because a mobile phone has fallen into the water that it’s undoubtedly dead. Certainly, it is feasible to redo an Kazam that has fallen into the water. To achieve this, it is needed to respect certain steps. People frequently have bad reflexes and this is what can deteriorate the Kazam. We will first of all discover the techniques to be taken after the Kazam has fallen into the water. We will discover in the second place the common errors that most people make.
Steps to follow in the event that your Kazam fell into the water
Whenever you need to recover your Kazam in working order, we recommend that you follow the steps listed below.
Do not try to turn the Kazam back on after getting out the water
The first thing to accomplish when the Kazam has fallen into the water is to switch off the mobile phone. Certainly, in the event that it did not switch off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Kazam is started and wet, you can make a short circuit and consequently toast the mobile phone.
Remove detachable components
When the Kazam is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be needed to remove the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Kazam
Utilizing a straw, you must suck up the water that is contained in your Kazam. For this, you only have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Kazam, you will be able to start drying it.
Dry the Kazam
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using techniques that cause the mobile phone to heat up or damage the mobile phone. When it is done, we recommend you to leave the Kazam in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Kazam.
Reassemble the components and turn on the Kazam
When you have completed the prior steps, your Kazam should be dry. So now you can try to turn on the Kazam. If this does not perform, we recommend you to wait a few days or to bring the Kazam to a repairshop.
What should not be done in the event that the Kazam has fallen into the water
There are several stuff not to accomplish when your Kazam has fallen into the water. The first of all is to try to turn the mobile phone back on just after. This can kill the Kazam. Following, it is strongly advised not to use a heat source to dry the Kazam. Without a doubt, solutions which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile phone, do not shake it. In fact, it could likewise damage the Kazam.
