Whether in the wc or in a swimming pool, it from time to time happens that the Jivi Xtreme 3X is slipped into the water. Nevertheless, it’s not simply because a telephone has fallen into the water that it is inevitably dead. Certainly, it is feasible to redo an Jivi Xtreme 3X that has fallen into the water. To get this done, it is essential to respect particular steps. People generally have bad reflexes and this is what can damage the Jivi Xtreme 3X. We will first see the techniques to be taken after the Jivi Xtreme 3X has fallen into the water. We will see in the 2nd place the common mistakes that most people make.
Methods to follow if your Jivi Xtreme 3X fell into the water
In the event that you need to recover your Jivi Xtreme 3X in operating order, we highly recommend that you follow the steps listed below.
Don’t attempt to turn the Jivi Xtreme 3X back on after getting out the water
The very first thing to accomplish when the Jivi Xtreme 3X has fallen into the water is to turn off the telephone. Certainly, if it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Jivi Xtreme 3X is turned on and wet, you might generate a short circuit and as a result toast the telephone.
Remove detachable components
Once the Jivi Xtreme 3X is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be essential to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these items to dry and continue to the next step.
Aspire the water that is in your Jivi Xtreme 3X
Employing a straw, you must suck up the water that is contained in your Jivi Xtreme 3X. For this, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Jivi Xtreme 3X, you will have the capacity to start drying it.
Dry the Jivi Xtreme 3X
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the telephone to heat up or damage the telephone. Once it is done, we suggest you to leave the Jivi Xtreme 3X in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Jivi Xtreme 3X.
Reassemble the components and turn on the Jivi Xtreme 3X
When you have completed the previous steps, your Jivi Xtreme 3X should be dry. So now you can try to turn on the Jivi Xtreme 3X. If this does not do the job, we suggest you to hang on some days or to bring the Jivi Xtreme 3X to a repairman.
What should not be done if the Jivi Xtreme 3X has fallen into the water
You will find a number of stuff not to accomplish when your Jivi Xtreme 3X has fallen into the water. The first is to try to turn the telephone back on just after. This can demolish the Jivi Xtreme 3X. Next, it is strongly advised not to use a heat source to dry the Jivi Xtreme 3X. In fact, solutions which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could as well ruin the Jivi Xtreme 3X.
