Whether in the wc or in a swimming pool, it from time to time occurs that the Huawei Y6 Prime is slipped into the water. However, it’s not simply because a phone has fallen into the water that it’s unavoidably dead. Indeed, it is feasible to redo an Huawei Y6 Prime that has fallen into the water. To do this, it is required to respect certain steps. People frequently have bad reflexes and this is what can deteriorate the Huawei Y6 Prime. We will first discover the techniques to be taken after the Huawei Y6 Prime has fallen into the water. We will discover in the 2nd place the common mistakes that a good number of people make.
Steps to follow if perhaps your Huawei Y6 Prime fell into the water
Whenever you want to recover your Huawei Y6 Prime in working order, we highly recommend that you follow the steps listed below.
Do not attempt to turn the Huawei Y6 Prime back on after exiting the water
One thing to perform when the Huawei Y6 Prime has fallen into the water is to switch off the phone. Indeed, if perhaps it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Huawei Y6 Prime is turned on and wet, you might generate a short circuit and as a result toast the phone.
Remove detachable components
When the Huawei Y6 Prime is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to remove the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Huawei Y6 Prime
Utilizing a straw, you have got to suck up the water that is contained in your Huawei Y6 Prime. For this, you merely need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Huawei Y6 Prime, you will have the ability to start drying it.
Dry the Huawei Y6 Prime
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Huawei Y6 Prime in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Huawei Y6 Prime.
Reassemble the components and turn on the Huawei Y6 Prime
When you have completed the previous steps, your Huawei Y6 Prime should be dry. So now you can make an attempt to turn on the Huawei Y6 Prime. If this does not do the job, we advise you to wait a couple of days or to bring the Huawei Y6 Prime to a repairshop.
What should not be done if perhaps the Huawei Y6 Prime has fallen into the water
You will find a number of things not to perform when ever your Huawei Y6 Prime has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the Huawei Y6 Prime. Next, it is highly advised not to use a heat source to dry the Huawei Y6 Prime. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well damage the Huawei Y6 Prime.
