Whether in the toilet or in a pool, it from time to time occurs that the Blackview BV7200 is slipped in the water. On the other hand, it is not simply because a phone has fallen in the water that it is obviously dead. Indeed, it is possible to redo an Blackview BV7200 that has fallen in the water. To get this done, it is required to respect specific actions. People frequently have bad reflexes and this is what can damage the Blackview BV7200. We will 1st discover the steps to be taken after the Blackview BV7200 has fallen into the water. We will discover in the 2nd place the classical mistakes that many people make.
Steps to follow if perhaps your Blackview BV7200 fell into the water
If you wish to recover your Blackview BV7200 in operating order, we highly recommend that you follow the steps below.
Do not try to turn the Blackview BV7200 back on after getting out the water
The very first thing to accomplish when the Blackview BV7200 has fallen into the water is to shut off the phone. Indeed, if perhaps it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Blackview BV7200 is switched on and wet, you may make a short circuit and as a result toast the phone.
Remove detachable components
Once the Blackview BV7200 is out of the water and turned off, it will have to be disassembled to the maximum. This means that it’ll be required to remove the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Blackview BV7200
Employing a straw, you will have to suck up the water that is contained in your Blackview BV7200. For this, you simply need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview BV7200, you will be able to start drying it.
Dry the Blackview BV7200
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. Once it is finished, we suggest you to leave the Blackview BV7200 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Blackview BV7200.
Reassemble the components and turn on the Blackview BV7200
When you have completed the previous steps, your Blackview BV7200 should be dry. So now you can try to turn on the Blackview BV7200. In the event that this does not function, we suggest you to wait some days or to bring the Blackview BV7200 to a repairman.
What should not be done if perhaps the Blackview BV7200 has fallen into the water
You will find several stuff not to accomplish when ever your Blackview BV7200 has fallen into the water. The 1st is to try to turn the phone back on just after. This can demolish the Blackview BV7200. Next, it is highly advised not to use a heat source to dry the Blackview BV7200. Without a doubt, solutions such as oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could likewise damage the Blackview BV7200.
