Whether in the wc or in a swimming pool, it from time to time happens that the Blackview BV5200 is dropped into the water. Nevertheless, it isn’t simply because a telephone has fallen into the water that it is obviously dead. Indeed, it is possible to redo an Blackview BV5200 that has fallen into the water. To get this done, it is necessary to respect certain steps. People typically have bad reflexes and this is what can degrade the Blackview BV5200. We will 1st discover the steps to be taken after the Blackview BV5200 has fallen into the water. We will discover in the second place the common errors that most people make.
Methods to follow in the event that your Blackview BV5200 fell into the water
If you wish to recover your Blackview BV5200 in operating order, we highly recommend that you follow the steps listed below.
Do not try to turn the Blackview BV5200 back on after exiting the water
One thing to do when the Blackview BV5200 has fallen into the water is to turn off the telephone. Indeed, in the event that it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Blackview BV5200 is turned on and wet, you can make a short circuit and consequently toast the telephone.
Remove detachable components
When the Blackview BV5200 is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be necessary to remove the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Blackview BV5200
By using a straw, you will need to suck up the water that is contained in your Blackview BV5200. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackview BV5200, you will be ready to start drying it.
Dry the Blackview BV5200
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator several hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is finished, we advise you to leave the Blackview BV5200 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Blackview BV5200.
Reassemble the components and turn on the Blackview BV5200
When you have completed the prior steps, your Blackview BV5200 should be dry. So now you can try to turn on the Blackview BV5200. In the event that this does not work, we advise you to hold out some days or to bring the Blackview BV5200 to a repairman.
What should not be done in the event that the Blackview BV5200 has fallen into the water
You will find several things not to do when ever your Blackview BV5200 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can destroy the Blackview BV5200. Next, it is highly recommended not to use a heat source to dry the Blackview BV5200. In fact, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the Blackview BV5200.
