Whether in the toilet or in a pool, it from time to time occurs that the Blackview A70 is slipped in the water. However, it isn’t simply because a mobile has fallen in the water that it is unavoidably dead. In truth, it is possible to redo an Blackview A70 that has fallen in the water. To achieve this, it is important to respect particular steps. People typically have bad reflexes and this is what can deteriorate the Blackview A70. We will 1st see the steps to be taken after the Blackview A70 has fallen into the water. We will see in the second place the common mistakes that a good number of people make.
Methods to follow in the event that your Blackview A70 fell into the water
Whenever you wish to restore your Blackview A70 in operating order, we advise that you follow the steps below.
Don’t try to turn the Blackview A70 back on after exiting the water
The first thing to accomplish when the Blackview A70 has fallen into the water is to turn off the mobile. In truth, in the event that it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Blackview A70 is switched on and wet, you might make a short circuit and therefore toast the mobile.
Remove detachable components
When the Blackview A70 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be important to remove the shell, the SIM card, the SD card and the electric battery if possible. When done, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Blackview A70
By using a straw, you have got to suck up the water that is contained in your Blackview A70. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Blackview A70, you will be able to start drying it.
Dry the Blackview A70
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile to heat up or damage the mobile. When it is completed, we advise you to leave the Blackview A70 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Blackview A70.
Reassemble the components and turn on the Blackview A70
When you have completed the previous steps, your Blackview A70 should be dry. So now you can make an attempt to turn on the Blackview A70. If perhaps this doesn’t perform, we advise you to hold out a couple of days or to bring the Blackview A70 to a repairman.
What should not be done in the event that the Blackview A70 has fallen into the water
You will find a number of things not to accomplish when your Blackview A70 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can kill the Blackview A70. Next, it is highly suggested not to use a heat source to dry the Blackview A70. In fact, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Certainly, it could additionally damage the Blackview A70.
