Whether in the toilet or in a pool, it sometimes occurs that the Blackview A10 is slipped into the water. Even so, it’s not simply because a mobile has fallen into the water that it’s undoubtedly dead. In truth, it is feasible to redo an Blackview A10 that has fallen into the water. To accomplish this, it is necessary to respect certain steps. People frequently have bad reflexes and this is what can deteriorate the Blackview A10. We will first see the methods to be taken after the Blackview A10 has fallen into the water. We will see in the 2nd place the classical errors that most people make.
Steps to follow if perhaps your Blackview A10 fell into the water
Whenever you want to restore your Blackview A10 in working order, we advise that you follow the steps listed below.
Do not try to turn the Blackview A10 back on after exiting the water
One thing to accomplish when the Blackview A10 has fallen into the water is to switch off the mobile. In truth, if perhaps it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Blackview A10 is started and wet, you can produce a short circuit and as a result toast the mobile.
Remove detachable components
Once the Blackview A10 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be necessary to take away the shell, the SIM card, the SD card and the battery if possible. Once completed, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Blackview A10
By using a straw, you have got to suck up the water that is contained in your Blackview A10. For this, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Blackview A10, you will have the ability to start drying it.
Dry the Blackview A10
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the mobile to heat up or damage the mobile. Once it is performed, we recommend you to leave the Blackview A10 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Blackview A10.
Reassemble the components and turn on the Blackview A10
When you have completed the previous steps, your Blackview A10 should be dry. So now you can make an attempt to turn on the Blackview A10. If this doesn’t work, we recommend you to hang on some days or to bring the Blackview A10 to a repairman.
What should not be done if perhaps the Blackview A10 has fallen into the water
You will find several points not to accomplish when ever your Blackview A10 has fallen into the water. The first is to make an attempt to turn the mobile back on just after. This can destroy the Blackview A10. Following, it is strongly recommended not to use a heat source to dry the Blackview A10. Without a doubt, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also damage the Blackview A10.
