Whether in the toilet or in a pool, it from time to time occurs that the ARCHOS Oxygen 63 is slipped into the water. Even so, it is not because a cellphone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an ARCHOS Oxygen 63 that has fallen into the water. To achieve this, it is important to respect particular steps. People frequently have bad reflexes and this is what can damage the ARCHOS Oxygen 63. We will first see the techniques to be taken after the ARCHOS Oxygen 63 has fallen into the water. We will see in the 2nd place the classical mistakes that the majority of people make.
Methods to follow if perhaps your ARCHOS Oxygen 63 fell into the water
If perhaps you desire to recover your ARCHOS Oxygen 63 in working order, we highly recommend that you follow the steps listed below.
Do not attempt to turn the ARCHOS Oxygen 63 back on after exiting the water
One thing to do when the ARCHOS Oxygen 63 has fallen into the water is to shut off the cellphone. In fact, if perhaps it did not turn off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the ARCHOS Oxygen 63 is started and wet, you could create a short circuit and therefore toast the cellphone.
Remove detachable components
Once the ARCHOS Oxygen 63 is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be important to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your ARCHOS Oxygen 63
By using a straw, you have got to suck up the water that is contained in your ARCHOS Oxygen 63. For doing it, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your ARCHOS Oxygen 63, you will have the capacity to start drying it.
Dry the ARCHOS Oxygen 63
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using solutions that cause the cellphone to heat up or damage the cellphone. Once it is performed, we suggest you to leave the ARCHOS Oxygen 63 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the ARCHOS Oxygen 63.
Reassemble the components and turn on the ARCHOS Oxygen 63
When you have completed the previous steps, your ARCHOS Oxygen 63 should be dry. So now you can try to turn on the ARCHOS Oxygen 63. If perhaps this does not function, we suggest you to wait some days or to bring the ARCHOS Oxygen 63 to a repairshop.
What should not be done if perhaps the ARCHOS Oxygen 63 has fallen into the water
There are several things not to do when your ARCHOS Oxygen 63 has fallen into the water. The first is to try to turn the cellphone back on just after. This can kill the ARCHOS Oxygen 63. Next, it is highly recommended not to use a heat source to dry the ARCHOS Oxygen 63. Certainly, methods such as oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. Indeed, it could also ruin the ARCHOS Oxygen 63.
