Whether in the wc or in a swimming pool, it sometimes happens that the Alcatel OT 5020D is slipped into the water. Nonetheless, it is not simply because a cellphone has fallen into the water that it’s undoubtedly dead. In fact, it is possible to redo an Alcatel OT 5020D that has fallen into the water. To achieve this, it is needed to respect particular actions. People generally have bad reflexes and this is what can deteriorate the Alcatel OT 5020D. We will first of all discover the techniques to be taken after the Alcatel OT 5020D has fallen into the water. We will discover in the secondary place the common errors that a good number of people make.
Steps to follow if your Alcatel OT 5020D fell into the water
If you desire to recover your Alcatel OT 5020D in working order, we suggest that you follow the steps listed below.
Do not attempt to turn the Alcatel OT 5020D back on after getting out the water
The very first thing to perform when the Alcatel OT 5020D has fallen into the water is to turn off the cellphone. In fact, if it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel OT 5020D is started and wet, you could create a short circuit and as a result toast the cellphone.
Remove detachable components
Once the Alcatel OT 5020D is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it’ll be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. Once done, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Alcatel OT 5020D
Utilizing a straw, you must suck up the water that is contained in your Alcatel OT 5020D. For doing it, you merely need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Alcatel OT 5020D, you will have the capacity to start drying it.
Dry the Alcatel OT 5020D
The fourth step is to dry the cellphone. For this, we advise you to put it in front of a ventilator several hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. Once it is finished, we advise you to leave the Alcatel OT 5020D in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Alcatel OT 5020D.
Reassemble the components and turn on the Alcatel OT 5020D
When you have completed the prior steps, your Alcatel OT 5020D should be dry. So now you can make an attempt to turn on the Alcatel OT 5020D. If this doesn’t do the job, we advise you to wait a few days or to bring the Alcatel OT 5020D to a repairman.
What should not be done if the Alcatel OT 5020D has fallen into the water
You will find several things not to perform when your Alcatel OT 5020D has fallen into the water. The first of all is to make an attempt to turn the cellphone back on just after. This can demolish the Alcatel OT 5020D. Following, it is highly recommended not to use a heat source to dry the Alcatel OT 5020D. Certainly, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the cellphone, do not shake it. In fact, it could additionally ruin the Alcatel OT 5020D.
