Whether in the toilet or in a pool, it sometimes occurs that the Alcatel One Touch Pixi First is slipped in the water. Even so, it is not because a phone has fallen in the water that it’s undoubtedly dead. Indeed, it is feasible to redo an Alcatel One Touch Pixi First that has fallen in the water. To do this, it is essential to respect specific actions. People frequently have bad reflexes and this is what can damage the Alcatel One Touch Pixi First. We will first discover the methods to be taken after the Alcatel One Touch Pixi First has fallen into the water. We will discover in the second place the classical errors that most people make.
Steps to follow in the event that your Alcatel One Touch Pixi First fell into the water
If you desire to recover your Alcatel One Touch Pixi First in operating order, we recommend that you follow the steps below.
Don’t try to turn the Alcatel One Touch Pixi First back on after exiting the water
The first thing to accomplish when the Alcatel One Touch Pixi First has fallen into the water is to turn off the phone. Indeed, in the event that it did not turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Alcatel One Touch Pixi First is started and wet, you could create a short circuit and as a result toast the phone.
Remove detachable components
Once the Alcatel One Touch Pixi First is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and continue to the next step.
Aspire the water that is in your Alcatel One Touch Pixi First
By using a straw, you will need to suck up the water that is contained in your Alcatel One Touch Pixi First. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Alcatel One Touch Pixi First, you will be able to start drying it.
Dry the Alcatel One Touch Pixi First
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Prevent using méthodes that cause the phone to heat up or damage the phone. Once it is done, we advise you to leave the Alcatel One Touch Pixi First in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Alcatel One Touch Pixi First.
Reassemble the components and turn on the Alcatel One Touch Pixi First
When you have completed the previous steps, your Alcatel One Touch Pixi First should be dry. So now you can try to turn on the Alcatel One Touch Pixi First. In the event that this doesn’t do the job, we advise you to hold out a few days or to bring the Alcatel One Touch Pixi First to a repairman.
What should not be done in the event that the Alcatel One Touch Pixi First has fallen into the water
There are several stuff not to accomplish when your Alcatel One Touch Pixi First has fallen into the water. The first is to try to turn the phone back on just after. This can demolish the Alcatel One Touch Pixi First. Following, it is strongly suggested not to use a heat source to dry the Alcatel One Touch Pixi First. Without a doubt, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Alcatel One Touch Pixi First.
