Whether in the wc or in a swimming pool, it from time to time happens that the Alcatel 1V is dropped in the water. Nevertheless, it’s not simply because a cellphone has fallen in the water that it’s inevitably dead. Certainly, it is possible to redo an Alcatel 1V that has fallen in the water. To achieve this, it is important to respect certain actions. People typically have bad reflexes and this is what can damage the Alcatel 1V. We will first discover the methods to be taken after the Alcatel 1V has fallen into the water. We will discover in the 2nd place the classical mistakes that the majority of people make.
Steps to follow in cases where your Alcatel 1V fell into the water
If you need to recover your Alcatel 1V in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Alcatel 1V back on after exiting the water
The first thing to perform when the Alcatel 1V has fallen into the water is to turn off the cellphone. Certainly, in cases where it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel 1V is turned on and wet, you might create a short circuit and therefore toast the cellphone.
Remove detachable components
When the Alcatel 1V is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it will probably be important to remove the shell, the SIM card, the SD card and the battery if possible. When performed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Alcatel 1V
Using a straw, you will have to suck up the water that is contained in your Alcatel 1V. For this, you only need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Alcatel 1V, you will have the ability to start drying it.
Dry the Alcatel 1V
The fourth step is to dry the cellphone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. When it is finished, we suggest you to leave the Alcatel 1V in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Alcatel 1V.
Reassemble the components and turn on the Alcatel 1V
When you have completed the prior steps, your Alcatel 1V should be dry. So now you can make an attempt to turn on the Alcatel 1V. In the event that this does not perform, we suggest you to wait a few days or to bring the Alcatel 1V to a repairman.
What should not be done in cases where the Alcatel 1V has fallen into the water
There are several things not to perform when ever your Alcatel 1V has fallen into the water. The first is to make an attempt to turn the cellphone back on just after. This can kill the Alcatel 1V. Next, it is strongly recommended not to use a heat source to dry the Alcatel 1V. Certainly, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the cellphone, do not shake it. Certainly, it could additionally damage the Alcatel 1V.
