Whether in the toilet or in a swimming pool, it sometimes happens that the Alcatel 1b is slipped into the water. Even so, it isn’t because a phone has fallen into the water that it’s unavoidably dead. Certainly, it is feasible to redo an Alcatel 1b that has fallen into the water. To achieve this, it is needed to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Alcatel 1b. We will first discover the techniques to be taken after the Alcatel 1b has fallen into the water. We will discover in the 2nd place the common mistakes that the majority of people make.
Steps to follow in the event that your Alcatel 1b fell into the water
Whenever you want to restore your Alcatel 1b in working order, we advise that you follow the steps listed below.
Do not attempt to turn the Alcatel 1b back on after exiting the water
One thing to perform when the Alcatel 1b has fallen into the water is to turn off the phone. Certainly, in the event that it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Alcatel 1b is switched on and wet, you might create a short circuit and therefore toast the phone.
Remove detachable components
When the Alcatel 1b is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Alcatel 1b
Using a straw, you need to suck up the water that is contained in your Alcatel 1b. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Alcatel 1b, you will have the capacity to start drying it.
Dry the Alcatel 1b
The fourth step is to dry the phone. For this, we recommend you to put it in front of a ventilator a number of hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is completed, we recommend you to leave the Alcatel 1b in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Alcatel 1b.
Reassemble the components and turn on the Alcatel 1b
When you have completed the previous steps, your Alcatel 1b should be dry. So now you can try to turn on the Alcatel 1b. If perhaps this does not work, we recommend you to hold out a few days or to bring the Alcatel 1b to a repairshop.
What should not be done in the event that the Alcatel 1b has fallen into the water
There are a number of points not to perform when ever your Alcatel 1b has fallen into the water. The first is to try to turn the phone back on just after. This can kill the Alcatel 1b. Following, it is highly suggested not to use a heat source to dry the Alcatel 1b. Certainly, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the phone, do not shake it. Certainly, it could as well ruin the Alcatel 1b.
