At times, the Blackview BV7100 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly sourced from a lot of places. So, so that you may connect properly to the Wifi network with your Blackview BV7100, we decided to write this guide. So we will observe together what to do and where to look to solve this issue of Wifi authentication. We will see at initially what you must do on the Blackview BV7100. Finally, we will see what it is actually necessary to do and check on your Wifi box.
How to proceed when the Blackview BV7100 has an authentication problem on the Wifi network
Forget the Wifi network on your Blackview BV7100
If the Wi-Fi network to which you want to connect has been changed since your last authentication, your Blackview BV7100 may display the message: Authentication or authentication error . If the issue comes from there, the answer is quite simple. Just forget about the Wifi network in your Blackview BV7100. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it’s carried out, you may try again to connect to the Wifi network. In the event that the issue is not fixed, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it might happen to have a issue of authentication Wifi on the Blackview BV7100 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it is actually incredibly basic. You should find a synchronization button to press. When this is carried out, a light will most of the time start blinking. You can actually then try to reconnect to the Wifi network with your Blackview BV7100. If it still does not work, go to the next trick.
Retype Security password
At times the authentication problem originates from the technique you type the Wifi network security password. Certainly, it is actually sometimes subtle to type a security password Wifi on its Blackview BV7100. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in many laptop problems, the solution is oftentimes incredibly simple. Certainly, 80% of the laptop problems are solved by restarting the machine. We therefore recommend you to restart your box and your Blackview BV7100. Then try to reconnect with your Blackview BV7100.
Check box settings
If none of the prior solutions did work, the problem could possibly be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to check in cases where the system of key is in WPA / WPA2 . If this is not the case, select this option. Then try to connect your Blackview BV7100 again to Wifi. If the authentication issue continues, we advise that you contact your service provider or a telephone store.
