Occasionally, the ZTE Blade S6 displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly be caused by many places. So, so that you can connect properly to the Wifi network with your ZTE Blade S6, we decided to produce this tuto. So we will find out together what to do and where to look to solve this issue of Wifi authentication. We will see at first what you need to do on the ZTE Blade S6. Finally, we will see what it can be necessary to do and check on your Wifi box.
How to proceed when the ZTE Blade S6 has an authentication problem on the Wifi network
Forget the Wifi network on your ZTE Blade S6
In the event that the Wi-Fi network to which you wish to connect has been changed since your last authentication, your ZTE Blade S6 may display the message: Authentication or authentication error . In the event that the issue comes from there, the solution is very simple. Just forget about the Wifi network in your ZTE Blade S6. To accomplish this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it is carried out, you can try again to connect to the Wifi network. In the event that the issue is not solved, go to the next section.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may possibly happen to have a issue of authentication Wifi on the ZTE Blade S6 because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it can be very basic. You should find a synchronization button to press. When ever this is carried out, a light will most of the time start blinking. Youre able to then try to reconnect to the Wifi network with your ZTE Blade S6. In the event that it still doesn’t function, go to the next trick.
Retype Password
Occasionally the authentication problem comes from the technique you type the Wifi network security password. In fact, it can be sometimes subtle to type a security password Wifi on its ZTE Blade S6. We consequently advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several pc problems, the solution is sometimes very simple. In fact, 80% of the pc problems are solved by restarting the machine. We therefore advise you to restart your box and your ZTE Blade S6. After that try to reconnect with your ZTE Blade S6.
Check box settings
In the event that non-e of the previous solutions did function, the problem might be found to be on the box of your provider. It will consequently be necessary to go in the parameters of the box and to check if perhaps the system of key is in WPA / WPA2 . In the event that this is not the case, select this option. After that try to connect your ZTE Blade S6 again to Wifi. In the event that the authentication issue remains, we suggest that you contact your service provider or a telephone store.
