At times, the Wiko Fever displays the Authentication Problem message when you try to connect to a Wi-Fi network. This kind of error message can possibly come from several places. So, so that you can connect properly to the Wifi network with your Wiko Fever, we decided to write this tuto. So we will see together what to do and where to look to resolve this issue of Wifi authentication. We will see at 1st what you must do on the Wiko Fever. Finally, we will see what it truly is important to do and check on your Wifi box.
How to proceed when the Wiko Fever has an authentication problem on the Wifi network
Forget the Wifi network on your Wiko Fever
If the Wi-Fi network to which you wish to connect has been changed since your last authentication, your Wiko Fever may display the text: Authentication or authentication error . If the trouble comes from there, the answer is quite simple. Simply forget about the Wifi network in your Wiko Fever. To achieve this, go to the settings of the Wifi network and keep pressed on the network in question. You will then have the option to select the option: Forget this network . Once it is done, you can try again to connect to the Wifi network. If the trouble is not fixed, go to the next step.
Press the box button
Whether your box is Orange, Bouygues Telecom, SFR or Numéricable, it may happen to have a trouble of authentication Wifi on the Wiko Fever because the box is not in Synchronization mode . If you need to activate the synchronization mode of your box, it truly is very simple. You should find a synchronization button to press. When this is done, a light will most of the time start blinking. You can then try to reconnect to the Wifi network with your Wiko Fever. If it still will not work, go to the next trick.
Retype Security password
At times the authentication problem originates from the way you type the Wifi network security password. Certainly, it truly is sometimes subtle to type a security password Wifi on its Wiko Fever. We for that reason advise you to try all the following possibilities:
- Type the code without spaces or hyphens
- Type the security password in uppercase
- Type the security password in lowercase
Restart your box
As in several computer problems, the solution is oftentimes very simple. Certainly, 80% of the computer problems are solved by restarting the machine. We therefore recommend you to restart your box and your Wiko Fever. Then try to reconnect with your Wiko Fever.
Check box settings
If non-e of the previous solutions did work, the problem might be found to be on the box of your provider. It will for that reason be important to go in the parameters of the box and to check if the system of key is in WPA / WPA2 . If this is not the case, select this option. Then try to connect your Wiko Fever again to Wifi. If the authentication trouble remains, we advise that you contact your service provider or a telephone store.
