Sharing the internet connection of Wiko Darkside in wifi is a very practical feature on the Wiko Darkside. In fact, putting the Wiko Darkside in modem mode makes it possible to share the connection of the mobile with your entourage or with your other devices. So, if you dont have a suitable Wifi access where you are, we will observe in the following paragraphs the technique to transform the Wiko Darkside into a wifi hotspot. We will 1st see the technique to turn on and configure connection sharing. We will see in a secondary section what is the connection sharing and what it implies for the Wiko Darkside.
The technique to share the Wiko Darkside connection
To turn your Wiko Darkside into a Wi-Fi hotspot, it’s extremely simple. In fact, it is simply required to carry out two steps. The initially is to enable connection sharing and the secondary is to set up the network. All you must do is stick to the two steps below.
Enable Internet Connection Sharing on Wiko Darkside
To share your Wiko Darkside net connection, you’ll 1st have to enable connection sharing. To accomplish this, go to the Wiko Darkside Settings menu . Once you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the Wiko Darkside is connected to a personal pc
- Share through mobile phone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Wiko Darkside connection. When it is active, you should see a tiny icon show up in the notifications bar.
Configure Wifi connection sharing on Wiko Darkside
At this point that you’ve set your Wiko Darkside in modem mode, you’ll have to set up the network so other devices can connect. Only those who have chosen Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, youre able to change the password to connect to the Wiko Darkside network. So, enter the security password of your choice and confirm. At last, youre able to also change the network name if you wish.
Connect to the Wiko Darkside network
At this point that the network is configured, youre able to connect to it with other devices. To accomplish this, you just simply have to bring your device and look for the Wiko Darkside network among the available WIFI networks. If you have found it, you can sign in using the password that you designed. And there you have a decent net connection!
What is Connection Sharing on a Wiko Darkside
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Wiko Darkside with other devices. So it is ideal when ever you don’t have a WiFi connection but you have 3G or 4G network on your Wiko Darkside. This allows you to have a drinking connection almost everywhere. Warning: Remember that Wiko Darkside’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your mobile plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a specific limit, the Wiko Darkside hotspot wifi turn off.
