Sharing the internet connection of Kyocera Torque in wifi is a very practical feature on the Kyocera Torque. In fact, putting the Kyocera Torque in modem mode can help you to share the connection of the mobile phone with your entourage or with your different devices. So, in case you dont have a suitable Wifi access where you stand, we will observe in this post how you can convert the Kyocera Torque into a wifi hotspot. We will first find out how you can enable and configure connection sharing. We will find out in a second section what is the connection sharing and what it implies for the Kyocera Torque.
The right way to share the Kyocera Torque connection
To turn your Kyocera Torque into a Wi-Fi hotspot, it’s extremely simple. In fact, it can be simply required to perform 2 steps. The first of all is to enable connection sharing and the second is to configure the network. All you must do is follow the 2 steps below.
Enable Internet Connection Sharing on Kyocera Torque
To share your Kyocera Torque net connection, you will 1st have to enable connection sharing. To accomplish this, go to the Kyocera Torque Settings menu . Once you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Kyocera Torque is connected to a computer
- Share through mobile phone bluetooth
When you have made your decision, you just have to test to activate the sharing of the Kyocera Torque connection. When ever it is active, you should find out a tiny icon appear in the notifications bar.
Set up Wifi connection sharing on Kyocera Torque
At this point that you’ve set your Kyocera Torque in modem mode, you’ll have to set up the network so other devices can connect. Only those who have chosen Wi-Fi sharing are affected by the setup. To configure, click Via Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. Once you are on this page, youre able to change the password to connect to the Kyocera Torque network. So, enter the password which you have chosen and confirm. At last, youre able to also modify the network name in case you wish.
Connect to the Kyocera Torque network
At this point that the network is configured, youre able to connect to it with other devices. To accomplish this, you just have to bring your system and look for the Kyocera Torque network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a great net connection!
What is Connection Sharing on a Kyocera Torque
To make it simple, sharing a connection means sharing the 3G or 4G connection of the Kyocera Torque with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your Kyocera Torque. This permits you to have a drinking connection almost everywhere. Warning: Be aware that Kyocera Torque’s connection share uses mobile data. This means that the internet usage you are using is deducted from your portable plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a certain limit, the Kyocera Torque hotspot wifi turn off.
