Sharing the internet connection of CUBOT ECHO in wifi is an extremely practical feature on the CUBOT ECHO. In truth, putting the CUBOT ECHO in modem mode makes it possible to share the connection of the phone with your entourage or with your other devices. So, in the event you dont have a suitable Wifi access where you stand, we will see in this post how to transform the CUBOT ECHO into a wifi hotspot. We will first observe how to turn on and configure connection sharing. We will observe in a secondary section what is the connection sharing and what it implies for the CUBOT ECHO.
How you can share the CUBOT ECHO connection
To turn your CUBOT ECHO into a Wi-Fi hotspot, it’s incredibly basic. In truth, it can be simply necessary to execute two steps. The 1st is to enable connection sharing and the secondary is to set up the network. All you need to do is follow the two steps below.
Enable Internet Connection Sharing on CUBOT ECHO
To share your CUBOT ECHO internet connection, you will 1st need to enable connection sharing. To get this done, go to the CUBOT ECHO Settings menu . When you’re there, you have to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the CUBOT ECHO is connected to a laptop
- Share by using mobile phone bluetooth
If you have made your decision, you just have to test to activate the sharing of the CUBOT ECHO connection. When it is active, you should observe a small icon appear in the notifications bar.
Set up Wifi connection sharing on CUBOT ECHO
Now that you’ve set your CUBOT ECHO in modem mode, you’ll need to set up the network so other devices can connect. Simply those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. When you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the CUBOT ECHO network. So, enter the security password of your choice and validate. Finally, you can actually also modify the network name in the event you wish.
Connect to the CUBOT ECHO network
Now that the network is configured, you can actually connect to it with other devices. To get this done, you just simply need to bring your device and look for the CUBOT ECHO network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a decent internet connection!
What is Connection Sharing on a CUBOT ECHO
To make it simple, sharing a connection means sharing the 3G or 4G connection of the CUBOT ECHO with other devices. So it’s ideal when you will not have a WiFi connection but you have 3G or 4G network on your CUBOT ECHO. This permits you to have a drinking connection almost everywhere. Warning: Note that CUBOT ECHO’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your téléphone plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a specific limit, the CUBOT ECHO hotspot wifi turn off.
