Sharing the internet connection of CUBOT Dinosaur in wifi is an extremely convenient feature on the CUBOT Dinosaur. In truth, putting the CUBOT Dinosaur in modem mode afford them the ability to share the connection of the mobile phone with your entourage or with your other devices. So, in case you do not have a suitable Wifi access where you stand, we will see in this article tips on how to transform the CUBOT Dinosaur into a wifi hotspot. We will initially discover tips on how to turn on and configure connection sharing. We will discover in a secondary step what is the connection sharing and what it implies for the CUBOT Dinosaur.
How you can share the CUBOT Dinosaur connection
To turn your CUBOT Dinosaur into a Wi-Fi hotspot, it’s incredibly straightforward. In truth, it’s just necessary to accomplish two steps. The initially is to enable connection sharing and the secondary is to configure the network. All you have to do is stick to the two steps below.
Enable Net Connection Sharing on CUBOT Dinosaur
To share your CUBOT Dinosaur internet connection, you’ll first need to enable connection sharing. To accomplish this, go to the CUBOT Dinosaur Settings menu . When you’re there, you need to go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the CUBOT Dinosaur is connected to a pc
- Share through cellphone bluetooth
When you have made your decision, you just have to check to activate the sharing of the CUBOT Dinosaur connection. When ever it is active, you should discover a little icon show up in the notifications bar.
Configure Wifi connection sharing on CUBOT Dinosaur
At this point that you have set your CUBOT Dinosaur in modem mode, you’ll need to set up the network so other devices can connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To configure, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you may change the password to connect to the CUBOT Dinosaur network. So, enter the security password of your choice and validate. Finally, you may also modify the network name in case you wish.
Connect to the CUBOT Dinosaur network
At this point that the network is configured, you may connect to it with other devices. To accomplish this, you simply need to bring your device and look for the CUBOT Dinosaur network among the available WIFI networks. When you have found it, you can log in using the password that you configured. And there you have a decent internet connection!
What is Connection Sharing on a CUBOT Dinosaur
To make it basic, sharing a connection means sharing the 3G or 4G connection of the CUBOT Dinosaur with other devices. So it is ideal when you will not have a WiFi connection but you have 3G or 4G network on your CUBOT Dinosaur. This permits you to have a good connection almost everywhere. Warning: Note that CUBOT Dinosaur’s connection share uses mobile data. This implies that the internet usage you are using is deducted from your mobile plan. So, it is possible to configure a limit on the consumption of mobile data. So, after a specific limit, the CUBOT Dinosaur hotspot wifi cuts.
