Sharing the net connection of Crosscall TREKKER-M1 in wifi is an incredibly practical feature on the Crosscall TREKKER-M1. Indeed, putting the Crosscall TREKKER-M1 in modem mode makes it possible to share the connection of the mobile phone with your entourage or with your other devices. So, if you dont have a suitable Wifi access where you stand, we will observe on this page tips on how to transform the Crosscall TREKKER-M1 into a wifi hotspot. We will first observe tips on how to enable and configure connection sharing. We will observe in a second step what is the connection sharing and what it signifies for the Crosscall TREKKER-M1.
How to share the Crosscall TREKKER-M1 connection
To turn your Crosscall TREKKER-M1 into a Wi-Fi hotspot, it’s incredibly basic. Indeed, it can be only required to execute 2 steps. The initially is to enable connection sharing and the second is to set up the network. All you must do is follow the 2 steps below.
Enable Internet Connection Sharing on Crosscall TREKKER-M1
To share your Crosscall TREKKER-M1 internet connection, you will first have to enable connection sharing. To achieve this, go to the Crosscall TREKKER-M1 Settings menu . When you’re there, you need to go to Wireless and Networks , and then find the Internet Connection Sharing tab. You will then have 3 choices available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when the Crosscall TREKKER-M1 is connected to a computer
- Share by using smartphone bluetooth
If you have made your choice, you just have to check to activate the sharing of the Crosscall TREKKER-M1 connection. When ever it is active, you should observe a small icon appear in the notifications bar.
Configure Wifi connection sharing on Crosscall TREKKER-M1
At this point that you’ve set your Crosscall TREKKER-M1 in modem mode, you’ll have to set up the network so other devices can connect. Simply those who have chosen Wi-Fi sharing are affected by the configuration. To set up, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can actually change the password to connect to the Crosscall TREKKER-M1 network. So, enter the security password of your choice and confirm. At last, you can actually also modify the network name if you wish.
Connect to the Crosscall TREKKER-M1 network
At this point that the network is configured, you can actually connect to it with other devices. To achieve this, you just have to bring your device and look for the Crosscall TREKKER-M1 network among the available WIFI networks. If you have found it, you can log in using the password that you configured. And there you have a good internet connection!
What is Connection Sharing on a Crosscall TREKKER-M1
To make it basic, sharing a connection means sharing the 3G or 4G connection of the Crosscall TREKKER-M1 with other devices. So it’s ideal when you don’t have a WiFi connection but you have 3G or 4G network on your Crosscall TREKKER-M1. This permits you to have a good connection almost everywhere. Warning: Realize that Crosscall TREKKER-M1’s connection share uses mobile data. This means that the net usage you are using is deducted from your téléphone plan. Thus, it is possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the Crosscall TREKKER-M1 hotspot wifi turn off.
