Sharing the internet connection of ALCATEL 1X in wifi is an extremely handy feature on the ALCATEL 1X. Indeed, putting the ALCATEL 1X in modem mode afford them the ability to share the connection of the phone with your entourage or with your different devices. So, in the event you do not have a suitable Wifi access where you are, we will observe in this article the technique to convert the ALCATEL 1X into a wifi hotspot. We will initially observe the technique to turn on and configure connection sharing. We will observe in a secondary section what is the connection sharing and what it signifies for the ALCATEL 1X.
How you can share the ALCATEL 1X connection
To turn your ALCATEL 1X into a Wi-Fi hotspot, it’s extremely straightforward. Indeed, it is actually just necessary to carry out 2 steps. The initially is to enable connection sharing and the secondary is to set up the network. All you need to do is stick to the 2 steps below.
Enable Net Connection Sharing on ALCATEL 1X
To share your ALCATEL 1X net connection, you’ll 1st need to enable connection sharing. To get this done, go to the ALCATEL 1X Settings menu . When you’re there, you must go to Wireless and Networks , and after that find the Internet Connection Sharing tab. You will then have three options available to you:
- Sharing the Wi-Fi connection: for connecting wireless devices
- USB sharing: when ever the ALCATEL 1X is connected to a pc
- Share through telephone bluetooth
When you have made your decision, you just have to check to activate the sharing of the ALCATEL 1X connection. When ever it is active, you should observe a tiny icon show up in the notifications bar.
Configure Wifi connection sharing on ALCATEL 1X
At this point that you have set your ALCATEL 1X in modem mode, you’ll need to set up the network so other devices may connect. Just those who have opted for Wi-Fi sharing are affected by the setup. To set up, click Through Wifi under Internet Connection Sharing. If you are there, go to Configure the Wi-Fi hotspot. When you are on this page, you can change the password to connect to the ALCATEL 1X network. So, enter the security password which you have chosen and confirm. Finally, you can also modify the network name in the event you wish.
Connect to the ALCATEL 1X network
At this point that the network is configured, you can connect to it with other devices. To get this done, you just simply need to bring your system and look for the ALCATEL 1X network among the available WIFI networks. When you have found it, you can sign in using the password that you configured. And there you have a decent net connection!
What is Connection Sharing on a ALCATEL 1X
To make it simple, sharing a connection means sharing the 3G or 4G connection of the ALCATEL 1X with other devices. So it is ideal when ever you don’t have a WiFi connection but you have 3G or 4G network on your ALCATEL 1X. This enables you to have a drinking connection almost everywhere. Warning: Remember that ALCATEL 1X’s connection share uses mobile data. It indicates that the internet usage you are using is deducted from your mobile plan. Thus, it’s possible to configure a limit on the consumption of mobile data. Thus, after a specific limit, the ALCATEL 1X hotspot wifi turn off.
