Inserting the SIM card into your Blackview P6000 is important if you want to use your telephone. In fact, the SIM card enables your Blackview P6000 to be able to connect to the mobile network and therefore to make phone calls. Nonetheless, in the event you just bought your Blackview P6000, it is actually not always simple to find out how to set the SIM card. That is why we decided to write this tuto. We will first see how to proceed before inserting the SIM card in the Blackview P6000. We will discover how to insert the SIM card. Finally, we will see what the different types of SIM card.
What to do before putting the SIM into your Blackview P6000
Before you start inserting the SIM card into your Blackview P6000, it is actually important to test 2 or 3 stuff. First of all, we advise you to switch off the Blackview P6000 before you set the SIM card. We also recommend you to test if the type of SIM card you have corresponds to the model of your mobile phone. In fact, there are a lot of types of SIM cards and each phone is compatible with a certain type. Refer to the last section of this tuto to learn more. At last, in cases where the location of the SIM card of your Blackview P6000 is on the side, we highly recommend that you have a pin or a thin and sharp object to open the slot for SIM. If you want to change the PIN code of the SIM card, please refer to our guideline to change the PIN code on Blackview P6000.
How to insert the SIM card into the Blackview P6000
Determined by the model of your Blackview P6000, there are two possible methods for inserting the SIM card. The right technique should therefore be 1 of the following.
Technique 1: Insert the SIM card by the side of your Blackview P6000
To insert the SIM card into your Blackview P6000, first find the slot that is normally on the side of the mobile phone. It is really simple to spot it because there is often a small hole next to it. When you have found it, you will have to insert a pointed object into the small hole next to the slot. As an example, you can make use of a paper clip to do so. By pushing into the hole, the SIM card rack should come out. You must then remove the rack from the slot. Simply insert the SIM card into this rack and re-insert it into your Blackview P6000. That is it!
Technique 2: Insert the SIM card from the back of the Blackview P6000
If your Blackview P6000 will not have a slot on the side, this means that the SIM slot is on the back of the mobile phone. The first step are going to be to remove the cache on the back of the Blackview P6000. To do this, you simply have to unfasten it with your fingertips. Once carried out, you should see the location of the SIM card. Occasionally the location is under the battery. In this case, you must remove the battery. All you have to do is insert the SIM card into your Blackview P6000. Be careful to put it in the best direction, the gold side of the card must be down. Reassemble everything and it’s good!
The different types of SIM cards
There are three different types of SIM cards. Indeed, these 3 types differ according to their size. We thus find:
- The SIM card: which is of regular size.
- The Micro SIM card: that is smaller than the standard size.
- The Nano SIM card: which is really extremely small. The chip covers almost the entire surface.
In case you do not have the best SIM card for your Blackview P6000, you can actually ask your operator for a different 1. There are additionally adapters that may solve compatibility issues. At last, in case you have a standard SIM card, it may be cut to make it into Micro SIM or Nano SIM. At your peril.
