In some cases the screen of Wiko JERRY remains black. This trouble can occur in many situations. Oftentimes it happens after the Wiko JERRY falls. Other times, the screen remains black after a start, lock, or sleep. No matter the reason, don’t be anxious, you will find several techniques to repair the black screen of your Wiko JERRY. For that, it will be necessary to verify several stuff just before attempting the diverse methods. We will find out at primary what things to check when the screen of Wiko JERRY remains black. We will find out in a second time all the tricks in order to unlock this awful black screen.
What should you watch when you have a black screen on Wiko JERRY
Before embarking on the techniques, we recommend you to verify the points below in order to better understand where the problem can form. This will give you good clues of the nature of the problem.
Is the Wiko JERRY LED on when the screen remains black?
One of the first of all stuff to verify is the little led that is on top of your screen. In cases where the LED is red or blue when the Wiko JERRY screen remains black, it implies that the phone is turned on. In this case, it is very likely that the problem originates from the screen.
Is the Wiko JERRY charged?
Occasionally, a deep battery discharge prevents the Wiko JERRY from turning on for some time. Ensure the Wiko JERRY is fully recharged by leaving it connected for at least 1 hour. If after this the LED doesn’t light and the screen remains black, the problem can potentially come from the electric battery.
Is the Wiko JERRY damaged?
If the Wiko JERRY screen remains black after shock, after falling , after being wet , or after damage , the screen may perhaps be harmed. In this case, not one of the techniques listed below will function. You will then have to bring your Wiko JERRY to a repairshop.
What you can do when the Wiko JERRY screen remains black?
After looking at that the problem originates from the screen, you can try the next ideas to unlock the black screen of your Wiko JERRY. If a method doesn’t function, go to the following one.
Plug the Wiko JERRY into its charger
One thing to accomplish when the screen of Wiko JERRY remains black is to put the mobile on. This will make it possible to be peaceful for all subsequent manipulations. This also handles the possible problem of a deep discharge of the mobile electric battery.
If you can, remove the electric battery from the Wiko JERRY
If the Wiko JERRY is easily detachable, we recommend you to remove the electric battery . This sometimes handles the black screen problem. Hang on some secs, then turn the battery back on and make an attempt to start the mobile. In cases where the screen is still blocked, go to the following step.
Remove SIM card and SD card
It sometimes occurs, without explanation, that the SIM card or the SD card conflicts with Wiko JERRY and triggers a black screen. 1 of the techniques to try is to remove the SIM card and the SD card. Once it’s done, it is advisable to try to start the mobile phone. In cases where it works, it indicates there is a conflict with the SIM or SD card.
Force Wiko JERRY to restart
If the screen remains black, the problem often resolves with a forced restart . To get this done, you have got to press several keys at the same time. You need to stay at least 10 secs for the forced restart to run. The key combo depends on the models but had to be 1 of the subsequent:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Hang on until the electric battery is empty
Finally, in the event that not one of the above solutions function, you can try to let your electric battery discharge. Make certain the electric battery is entirely empty. Once it is carried out, plug your Wiko JERRY into its power adaptor and try to start the Wiko JERRY.
