Sometimes the screen of Wiko Jerry 3 stays black. This issue may appear in many circumstances. Oftentimes it occurs after the Wiko Jerry 3 falls. Other times, the screen stays black after a start, lock, or sleep. In any case, do not worry, you will find many tips to repair the black screen of your Wiko Jerry 3. For that, it will probably be essential to check several points prior to attempting the diverse techniques. We will find out at primary what things to verify when the screen of Wiko Jerry 3 remains black. We will find out in a second time all the tricks to be able to unlock this bad black screen.
What should you check out when you have a black screen on Wiko Jerry 3
Before embarking on the tricks, we suggest you to check the points below in order to better understand where the issue can form. This will provide you good clues of the nature of the issue.
Is the Wiko Jerry 3 LED on when the screen remains black?
One of the first of all points to check is the little led that is at the top of your screen. In cases where the LED is red or blue when the Wiko Jerry 3 screen remains black, it indicates that the mobile phone is started. In such a case, it is extremely probably that the issue originates from the screen.
Is the Wiko Jerry 3 charged?
From time to time, a deep battery discharge prevents the Wiko Jerry 3 from turning on for a while. Be sure the Wiko Jerry 3 is entirely charged by leaving it connected for at least one hour. In the event that after that the LED doesn’t light up and the screen stays black, the issue can probably originate from the battery.
Is the Wiko Jerry 3 damaged?
If the Wiko Jerry 3 screen remains black after shock, after dropping , after being wet , or after breaking , the screen may perhaps be harmed. In such a case, not one of the methods below will function. You will then have to bring your Wiko Jerry 3 to a repairshop.
How to proceed when the Wiko Jerry 3 screen stays black?
After examining that the issue originates from the screen, you can try the following recommendations to unlock the black screen of your Wiko Jerry 3. If a trick doesn’t function, check out the following one.
Plug the Wiko Jerry 3 into its charger
One thing to accomplish when the screen of Wiko Jerry 3 remains black is to put the telephone on. This makes it possible to be serene for any subsequent manipulations. This likewise resolves the possible issue of a deep discharge of the telephone battery.
If you can, take out the battery from the Wiko Jerry 3
If the Wiko Jerry 3 is easily detachable, we suggest you to remove the battery . This sometimes solves the black screen issue. Hang on some seconds, then turn the battery back on and make an attempt to start the telephone. If perhaps the screen is still blocked, check out the following step.
Remove SIM card and SD card
It sometimes occurs, without justification, that the SIM card or the SD card conflicts with Wiko Jerry 3 and triggers a black screen. 1 of the methods to try is to take out the SIM card and the SD card. When it’s finished, you should try to start the cellphone. If perhaps it works, it means there is a conflict with the SIM or SD card.
Force Wiko Jerry 3 to reboot
If the screen stays black, the issue often solves with a forced reboot . To do this, you simply must press a number of keys at the same time. You need to remain at least TEN seconds for the forced reboot to run. The key combination depends upon the versions but had to be one of the following:
- low volume + power button
- low volume + power button + cough Home
- high volume + power button
- volume top + touch power + cough Home
- touch power + cough Home
Wait until the battery is empty
Finally, in cases where none of the previously mentioned méthodes function, you can try to let your battery discharge. Make certain the battery is entirely empty. When it is carried out, plug your Wiko Jerry 3 into its power adaptor and try to start the Wiko Jerry 3.
