Whether in the toilet or in a swimming pool, it from time to time happens that the ZTE Blade C2 is dropped in the water. However, it isn’t simply because a mobile has fallen in the water that it’s undoubtedly dead. Indeed, it is possible to redo an ZTE Blade C2 that has fallen in the water. To do this, it is necessary to respect specific actions. People often have bad reflexes and this is what can deteriorate the ZTE Blade C2. We will 1st discover the techniques to be taken after the ZTE Blade C2 has fallen into the water. We will discover in the 2nd place the classical errors that a good number of people make.
Methods to follow if your ZTE Blade C2 fell into the water
If you wish to restore your ZTE Blade C2 in operating order, we advise that you follow the steps below.
Do not attempt to turn the ZTE Blade C2 back on after getting out the water
One thing to perform when the ZTE Blade C2 has fallen into the water is to switch off the mobile. Indeed, if it didn’t switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the ZTE Blade C2 is turned on and wet, you could produce a short circuit and as a result toast the mobile.
Remove detachable components
Once the ZTE Blade C2 is out of the water and turned off, it will have to be disassembled to the maximum. This implies that it’ll be necessary to remove the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your ZTE Blade C2
By using a straw, you have got to suck up the water that is contained in your ZTE Blade C2. For doing it, you only have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your ZTE Blade C2, you will have the ability to start drying it.
Dry the ZTE Blade C2
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the mobile to heat up or damage the mobile. Once it is completed, we suggest you to leave the ZTE Blade C2 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the ZTE Blade C2.
Reassemble the components and turn on the ZTE Blade C2
When you have completed the prior steps, your ZTE Blade C2 should be dry. So now you can try to turn on the ZTE Blade C2. In the event that this does not perform, we suggest you to wait a couple of days or to bring the ZTE Blade C2 to a repairman.
What should not be done if the ZTE Blade C2 has fallen into the water
There are a number of stuff not to perform when your ZTE Blade C2 has fallen into the water. The 1st is to try to turn the mobile back on just after. This can demolish the ZTE Blade C2. Following, it is strongly suggested not to use a heat source to dry the ZTE Blade C2. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Indeed, it could as well ruin the ZTE Blade C2.
