Whether in the toilet or in a swimming pool, it occasionally occurs that the Zopo ZP999 is dropped in the water. Nevertheless, it isn’t simply because a telephone has fallen in the water that it is undoubtedly dead. Certainly, it is feasible to redo an Zopo ZP999 that has fallen in the water. To do this, it is essential to respect specific actions. People typically have bad reflexes and this is what can damage the Zopo ZP999. We will 1st see the methods to be taken after the Zopo ZP999 has fallen into the water. We will see in the second place the classical errors that a large number of people make.
Methods to follow if perhaps your Zopo ZP999 fell into the water
If perhaps you want to restore your Zopo ZP999 in operating order, we recommend that you follow the steps listed below.
Don’t try to turn the Zopo ZP999 back on after getting out the water
The very first thing to do when the Zopo ZP999 has fallen into the water is to switch off the telephone. Certainly, if perhaps it did not switch off, turn it off without doing any other manipulation. In cases where it is already off, do not try to turn it back on for the moment. In cases where the Zopo ZP999 is switched on and wet, you may make a short circuit and as a result toast the telephone.
Remove detachable components
Once the Zopo ZP999 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it will probably be essential to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Zopo ZP999
Employing a straw, you will have to suck up the water that is contained in your Zopo ZP999. For doing it, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Zopo ZP999, you will have the capacity to start drying it.
Dry the Zopo ZP999
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Zopo ZP999 in rice for 24 or 48 hours. The rice will as a result absorb the wetness that remains in the Zopo ZP999.
Reassemble the components and turn on the Zopo ZP999
When you have completed the prior steps, your Zopo ZP999 should be dry. So now you can try to turn on the Zopo ZP999. In the event that this does not function, we recommend you to hold out some days or to bring the Zopo ZP999 to a repairshop.
What should not be done if perhaps the Zopo ZP999 has fallen into the water
There are several things not to do when your Zopo ZP999 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can demolish the Zopo ZP999. Next, it is strongly suggested not to use a heat source to dry the Zopo ZP999. Without a doubt, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally damage the Zopo ZP999.
