Whether in the wc or in a swimming pool, it occasionally happens that the Wiko Lenny 2 is slipped into the water. However, it isn’t simply because a telephone has fallen into the water that it’s inevitably dead. In fact, it is possible to redo an Wiko Lenny 2 that has fallen into the water. To accomplish this, it is important to respect certain actions. People generally have bad reflexes and this is what can damage the Wiko Lenny 2. We will first of all see the techniques to be taken after the Wiko Lenny 2 has fallen into the water. We will see in the second place the common mistakes that many people make.
Steps to follow if perhaps your Wiko Lenny 2 fell into the water
In the event that you desire to recover your Wiko Lenny 2 in operating order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Wiko Lenny 2 back on after getting out the water
One thing to accomplish when the Wiko Lenny 2 has fallen into the water is to turn off the telephone. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Wiko Lenny 2 is switched on and wet, you could create a short circuit and as a result toast the telephone.
Remove detachable components
Once the Wiko Lenny 2 is out of the water and switched off, it will have to be disassembled to the highest possible. This implies that it will be important to take away the shell, the SIM card, the SD card and the electric battery if possible. Once carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Wiko Lenny 2
Utilizing a straw, you will have to suck up the water that is contained in your Wiko Lenny 2. For this, you just need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko Lenny 2, you will have the capacity to start drying it.
Dry the Wiko Lenny 2
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. Once it is performed, we recommend you to leave the Wiko Lenny 2 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Wiko Lenny 2.
Reassemble the components and turn on the Wiko Lenny 2
When you have completed the previous steps, your Wiko Lenny 2 should be dry. So now you can make an attempt to turn on the Wiko Lenny 2. In the event that this does not do the job, we recommend you to hold out a few days or to bring the Wiko Lenny 2 to a repairman.
What should not be done if perhaps the Wiko Lenny 2 has fallen into the water
There are several things not to accomplish when ever your Wiko Lenny 2 has fallen into the water. The first of all is to make an attempt to turn the telephone back on just after. This can kill the Wiko Lenny 2. Next, it is highly recommended not to use a heat source to dry the Wiko Lenny 2. Certainly, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the telephone, do not shake it. Indeed, it could as well damage the Wiko Lenny 2.
