Whether in the wc or in a pool, it sometimes happens that the Wiko Iggy is slipped into the water. Nonetheless, it is not simply because a phone has fallen into the water that it’s inevitably dead. In fact, it is feasible to redo an Wiko Iggy that has fallen into the water. To do this, it is necessary to respect specific steps. People frequently have bad reflexes and this is what can deteriorate the Wiko Iggy. We will 1st see the steps to be taken after the Wiko Iggy has fallen into the water. We will see in the second place the classical errors that most people make.
Methods to follow if your Wiko Iggy fell into the water
If you want to restore your Wiko Iggy in operating order, we advise that you follow the steps below.
Do not try to turn the Wiko Iggy back on after exiting the water
One thing to perform when the Wiko Iggy has fallen into the water is to switch off the phone. In fact, if it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Wiko Iggy is turned on and wet, you can generate a short circuit and therefore toast the phone.
Remove detachable components
Once the Wiko Iggy is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be necessary to remove the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Wiko Iggy
Utilizing a straw, you must suck up the water that is contained in your Wiko Iggy. For this, you only have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Wiko Iggy, you will be able to start drying it.
Dry the Wiko Iggy
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using techniques that cause the phone to heat up or damage the phone. Once it is done, we advise you to leave the Wiko Iggy in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Wiko Iggy.
Reassemble the components and turn on the Wiko Iggy
When you have completed the previous steps, your Wiko Iggy should be dry. So now you can make an attempt to turn on the Wiko Iggy. In the event that this doesn’t work, we advise you to wait some days or to bring the Wiko Iggy to a repairshop.
What should not be done if the Wiko Iggy has fallen into the water
There are a number of things not to perform when ever your Wiko Iggy has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can kill the Wiko Iggy. Next, it is strongly advised not to use a heat source to dry the Wiko Iggy. Indeed, solutions such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could also ruin the Wiko Iggy.
