Whether in the toilet or in a swimming pool, it sometimes happens that the Wiko Darkside is dropped in the water. Nevertheless, it isn’t simply because a telephone has fallen in the water that it’s inevitably dead. Indeed, it is possible to redo an Wiko Darkside that has fallen in the water. To achieve this, it is needed to respect particular actions. People frequently have bad reflexes and this is what can degrade the Wiko Darkside. We will first discover the methods to be taken after the Wiko Darkside has fallen into the water. We will discover in the second place the common mistakes that a good number of people make.
Methods to follow in cases where your Wiko Darkside fell into the water
In the event that you want to restore your Wiko Darkside in working order, we recommend that you follow the steps below.
Do not attempt to turn the Wiko Darkside back on after exiting the water
The first thing to do when the Wiko Darkside has fallen into the water is to turn off the telephone. Indeed, in cases where it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Wiko Darkside is turned on and wet, you can produce a short circuit and therefore toast the telephone.
Remove detachable components
When the Wiko Darkside is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it’ll be needed to take out the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Wiko Darkside
By using a straw, you must suck up the water that is contained in your Wiko Darkside. For doing it, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Darkside, you will be ready to start drying it.
Dry the Wiko Darkside
The fourth step is to dry the telephone. For this, we recommend you to put it in front of a ventilator several hours. Prevent using méthodes that cause the telephone to heat up or damage the telephone. When it is completed, we recommend you to leave the Wiko Darkside in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Wiko Darkside.
Reassemble the components and turn on the Wiko Darkside
When you have completed the previous steps, your Wiko Darkside should be dry. So now you can try to turn on the Wiko Darkside. If this doesn’t work, we recommend you to hang on a couple of days or to bring the Wiko Darkside to a repairman.
What should not be done in cases where the Wiko Darkside has fallen into the water
You will find several points not to do when ever your Wiko Darkside has fallen into the water. The first is to try to turn the telephone back on just after. This can demolish the Wiko Darkside. Next, it is strongly recommended not to use a heat source to dry the Wiko Darkside. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could likewise ruin the Wiko Darkside.
