Whether in the wc or in a swimming pool, it from time to time occurs that the Wiko Bloom is slipped into the water. On the other hand, it’s not because a telephone has fallen into the water that it’s undoubtedly dead. In truth, it is possible to redo an Wiko Bloom that has fallen into the water. To achieve this, it is required to respect certain steps. People generally have bad reflexes and this is what can degrade the Wiko Bloom. We will 1st see the steps to be taken after the Wiko Bloom has fallen into the water. We will see in the second place the classical errors that a large number of people make.
Steps to follow if your Wiko Bloom fell into the water
Whenever you wish to restore your Wiko Bloom in working order, we suggest that you follow the steps listed below.
Don’t attempt to turn the Wiko Bloom back on after getting out the water
One thing to do when the Wiko Bloom has fallen into the water is to switch off the telephone. In truth, if it didn’t turn off, turn it off without doing any other tricks. If it is already off, do not attempt to turn it back on for the moment. If the Wiko Bloom is turned on and wet, you can make a short circuit and therefore toast the telephone.
Remove detachable components
When the Wiko Bloom is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these things to dry and continue to the next step.
Aspire the water that is in your Wiko Bloom
Using a straw, you must suck up the water that is contained in your Wiko Bloom. For doing it, you simply have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Wiko Bloom, you will be able to start drying it.
Dry the Wiko Bloom
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is done, we advise you to leave the Wiko Bloom in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Wiko Bloom.
Reassemble the components and turn on the Wiko Bloom
When you have completed the previous steps, your Wiko Bloom should be dry. So now you can try to turn on the Wiko Bloom. If perhaps this doesn’t work, we advise you to wait a few days or to bring the Wiko Bloom to a repairman.
What should not be done if the Wiko Bloom has fallen into the water
There are a number of points not to do when ever your Wiko Bloom has fallen into the water. The 1st is to try to turn the telephone back on just after. This can demolish the Wiko Bloom. Next, it is highly suggested not to use a heat source to dry the Wiko Bloom. In fact, techniques which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could additionally ruin the Wiko Bloom.
