Whether in the wc or in a pool, it sometimes occurs that the Wiko B-Kool is slipped into the water. Nonetheless, it is not simply because a mobile phone has fallen into the water that it’s undoubtedly dead. Indeed, it is feasible to redo an Wiko B-Kool that has fallen into the water. To do this, it is required to respect particular steps. People generally have bad reflexes and this is what can deteriorate the Wiko B-Kool. We will 1st see the methods to be taken after the Wiko B-Kool has fallen into the water. We will see in the secondary place the classical errors that a good number of people make.
Methods to follow in cases where your Wiko B-Kool fell into the water
If perhaps you need to recover your Wiko B-Kool in operating order, we advise that you follow the steps listed below.
Don’t try to turn the Wiko B-Kool back on after getting out the water
One thing to accomplish when the Wiko B-Kool has fallen into the water is to switch off the mobile phone. Indeed, in cases where it did not switch off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Wiko B-Kool is turned on and wet, you can create a short circuit and therefore toast the mobile phone.
Remove detachable components
Once the Wiko B-Kool is out of the water and turned off, it will have to be disassembled to the maximum. This means that it will be required to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Wiko B-Kool
Using a straw, you have got to suck up the water that is contained in your Wiko B-Kool. For doing it, you only need to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Wiko B-Kool, you will be ready to start drying it.
Dry the Wiko B-Kool
The fourth step is to dry the mobile phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using procédures that cause the mobile phone to heat up or damage the mobile phone. Once it is performed, we advise you to leave the Wiko B-Kool in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Wiko B-Kool.
Reassemble the components and turn on the Wiko B-Kool
When you have completed the prior steps, your Wiko B-Kool should be dry. So now you can try to turn on the Wiko B-Kool. In the event that this doesn’t work, we advise you to wait a few days or to bring the Wiko B-Kool to a repairman.
What should not be done in cases where the Wiko B-Kool has fallen into the water
You will find a number of points not to accomplish when ever your Wiko B-Kool has fallen into the water. The 1st is to try to turn the mobile phone back on just after. This can demolish the Wiko B-Kool. Next, it is strongly recommended not to use a heat source to dry the Wiko B-Kool. Indeed, techniques which include oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile phone, do not shake it. Indeed, it could also ruin the Wiko B-Kool.
