Whether in the wc or in a swimming pool, it from time to time happens that the T-Mobile G1 is slipped in the water. Nonetheless, it isn’t simply because a phone has fallen in the water that it is undoubtedly dead. Certainly, it is possible to redo an T-Mobile G1 that has fallen in the water. To do this, it is necessary to respect specific actions. People typically have bad reflexes and this is what can degrade the T-Mobile G1. We will first discover the techniques to be taken after the T-Mobile G1 has fallen into the water. We will discover in the secondary place the common errors that the majority of people make.
Steps to follow in the event that your T-Mobile G1 fell into the water
In the event that you need to restore your T-Mobile G1 in working order, we advise that you follow the steps below.
Do not try to turn the T-Mobile G1 back on after exiting the water
The very first thing to perform when the T-Mobile G1 has fallen into the water is to shut off the phone. Certainly, in the event that it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the T-Mobile G1 is turned on and wet, you can create a short circuit and consequently toast the phone.
Remove detachable components
Once the T-Mobile G1 is out of the water and turned off, it will have to be disassembled to the highest possible. Meaning that it’ll be necessary to take away the shell, the SIM card, the SD card and the battery if possible. Once carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your T-Mobile G1
Employing a straw, you have got to suck up the water that is contained in your T-Mobile G1. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your T-Mobile G1, you will have the ability to start drying it.
Dry the T-Mobile G1
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using méthodes that cause the phone to heat up or damage the phone. Once it is done, we suggest you to leave the T-Mobile G1 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the T-Mobile G1.
Reassemble the components and turn on the T-Mobile G1
When you have completed the prior steps, your T-Mobile G1 should be dry. So now you can make an attempt to turn on the T-Mobile G1. If this does not do the job, we suggest you to wait a few days or to bring the T-Mobile G1 to a repairman.
What should not be done in the event that the T-Mobile G1 has fallen into the water
There are several things not to perform when your T-Mobile G1 has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can destroy the T-Mobile G1. Following, it is highly recommended not to use a heat source to dry the T-Mobile G1. Certainly, solutions such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. Indeed, it could also damage the T-Mobile G1.
