Whether in the toilet or in a pool, it occasionally happens that the SFR Startrail 7 is dropped in the water. Even so, it is not simply because a mobile has fallen in the water that it’s unavoidably dead. In fact, it is feasible to redo an SFR Startrail 7 that has fallen in the water. To achieve this, it is necessary to respect particular steps. People frequently have bad reflexes and this is what can deteriorate the SFR Startrail 7. We will first see the steps to be taken after the SFR Startrail 7 has fallen into the water. We will see in the second place the classical errors that a large number of people make.
Methods to follow in cases where your SFR Startrail 7 fell into the water
Whenever you want to restore your SFR Startrail 7 in working order, we suggest that you follow the steps listed below.
Do not attempt to turn the SFR Startrail 7 back on after exiting the water
One thing to perform when the SFR Startrail 7 has fallen into the water is to switch off the mobile. In fact, in cases where it did not switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the SFR Startrail 7 is turned on and wet, you could make a short circuit and consequently toast the mobile.
Remove detachable components
Once the SFR Startrail 7 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will be necessary to take out the shell, the SIM card, the SD card and the electric battery if possible. Once performed, put all of these things to dry and continue to the next step.
Aspire the water that is in your SFR Startrail 7
Using a straw, you need to suck up the water that is contained in your SFR Startrail 7. For this, you just need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your SFR Startrail 7, you will have the capacity to start drying it.
Dry the SFR Startrail 7
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator several hours. Prevent using solutions that cause the mobile to heat up or damage the mobile. Once it is finished, we recommend you to leave the SFR Startrail 7 in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the SFR Startrail 7.
Reassemble the components and turn on the SFR Startrail 7
When you have completed the prior steps, your SFR Startrail 7 should be dry. So now you can try to turn on the SFR Startrail 7. In the event that this does not do the job, we recommend you to hold out some days or to bring the SFR Startrail 7 to a repairshop.
What should not be done in cases where the SFR Startrail 7 has fallen into the water
There are several stuff not to perform when your SFR Startrail 7 has fallen into the water. The first is to try to turn the mobile back on just after. This can demolish the SFR Startrail 7. Next, it is highly recommended not to use a heat source to dry the SFR Startrail 7. Without a doubt, methods such as oven or hair dryer heat the components and may deteriorate them. Finally, to get the water out of the mobile, do not shake it. In fact, it could also ruin the SFR Startrail 7.
