Whether in the toilet or in a swimming pool, it from time to time happens that the Samsung Rex 80 is slipped in the water. Nonetheless, it isn’t simply because a mobile has fallen in the water that it’s inevitably dead. In truth, it is feasible to redo an Samsung Rex 80 that has fallen in the water. To accomplish this, it is required to respect particular actions. People often have bad reflexes and this is what can degrade the Samsung Rex 80. We will 1st see the steps to be taken after the Samsung Rex 80 has fallen into the water. We will see in the 2nd place the common mistakes that a large number of people make.
Steps to follow if your Samsung Rex 80 fell into the water
Whenever you wish to recover your Samsung Rex 80 in operating order, we recommend that you follow the steps listed below.
Don’t try to turn the Samsung Rex 80 back on after exiting the water
The very first thing to accomplish when the Samsung Rex 80 has fallen into the water is to turn off the mobile. In truth, if it didn’t switch off, turn it off without doing any other manipulation. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Samsung Rex 80 is switched on and wet, you could produce a short circuit and as a result toast the mobile.
Remove detachable components
Once the Samsung Rex 80 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be required to remove the shell, the SIM card, the SD card and the electric battery if possible. Once completed, put all of these items to dry and continue to the following step.
Aspire the water that is in your Samsung Rex 80
Using a straw, you have got to suck up the water that is contained in your Samsung Rex 80. For this, you merely have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Samsung Rex 80, you will have the ability to start drying it.
Dry the Samsung Rex 80
The fourth step is to dry the mobile. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using méthodes that cause the mobile to heat up or damage the mobile. Once it is completed, we recommend you to leave the Samsung Rex 80 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that stays in the Samsung Rex 80.
Reassemble the components and turn on the Samsung Rex 80
When you have completed the prior steps, your Samsung Rex 80 should be dry. So now you can make an attempt to turn on the Samsung Rex 80. If this does not perform, we recommend you to hold out a couple of days or to bring the Samsung Rex 80 to a repairshop.
What should not be done if the Samsung Rex 80 has fallen into the water
There are a number of things not to accomplish when ever your Samsung Rex 80 has fallen into the water. The 1st is to make an attempt to turn the mobile back on just after. This can demolish the Samsung Rex 80. Following, it is strongly suggested not to use a heat source to dry the Samsung Rex 80. Indeed, solutions which include oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the mobile, do not shake it. In fact, it could likewise ruin the Samsung Rex 80.
