Whether in the wc or in a pool, it occasionally happens that the Motorola Moto Z Force is dropped into the water. On the other hand, it isn’t simply because a phone has fallen into the water that it’s unavoidably dead. Certainly, it is possible to redo an Motorola Moto Z Force that has fallen into the water. To achieve this, it is essential to respect certain steps. People generally have bad reflexes and this is what can deteriorate the Motorola Moto Z Force. We will first discover the steps to be taken after the Motorola Moto Z Force has fallen into the water. We will discover in the 2nd place the classical errors that a large number of people make.
Methods to follow if your Motorola Moto Z Force fell into the water
Whenever you need to recover your Motorola Moto Z Force in working order, we advise that you follow the steps listed below.
Don’t attempt to turn the Motorola Moto Z Force back on after exiting the water
The first thing to do when the Motorola Moto Z Force has fallen into the water is to switch off the phone. Certainly, if it didn’t switch off, turn it off without doing any other tricks. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Motorola Moto Z Force is started and wet, you might produce a short circuit and therefore toast the phone.
Remove detachable components
When the Motorola Moto Z Force is out of the water and turned off, it will have to be disassembled to the maximum. Meaning that it will probably be essential to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these items to dry and continue to the next step.
Aspire the water that is in your Motorola Moto Z Force
By using a straw, you need to suck up the water that is contained in your Motorola Moto Z Force. For doing it, you merely have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Motorola Moto Z Force, you will be able to start drying it.
Dry the Motorola Moto Z Force
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is completed, we advise you to leave the Motorola Moto Z Force in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Motorola Moto Z Force.
Reassemble the components and turn on the Motorola Moto Z Force
When you have completed the previous steps, your Motorola Moto Z Force should be dry. So now you can make an attempt to turn on the Motorola Moto Z Force. If perhaps this does not perform, we advise you to wait some days or to bring the Motorola Moto Z Force to a repairshop.
What should not be done if the Motorola Moto Z Force has fallen into the water
There are a number of stuff not to do when your Motorola Moto Z Force has fallen into the water. The first is to make an attempt to turn the phone back on just after. This can demolish the Motorola Moto Z Force. Following, it is strongly recommended not to use a heat source to dry the Motorola Moto Z Force. In fact, solutions which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Certainly, it could also damage the Motorola Moto Z Force.
