Whether in the wc or in a swimming pool, it occasionally happens that the Moto Z2 Play is dropped into the water. Even so, it is not because a mobile has fallen into the water that it’s inevitably dead. Certainly, it is feasible to redo an Moto Z2 Play that has fallen into the water. To achieve this, it is required to respect specific steps. People generally have bad reflexes and this is what can deteriorate the Moto Z2 Play. We will first of all discover the methods to be taken after the Moto Z2 Play has fallen into the water. We will discover in the secondary place the common errors that a good number of people make.
Methods to follow in the event that your Moto Z2 Play fell into the water
In the event that you need to recover your Moto Z2 Play in working order, we recommend that you follow the steps below.
Don’t attempt to turn the Moto Z2 Play back on after getting out the water
One thing to do when the Moto Z2 Play has fallen into the water is to switch off the mobile. Certainly, in the event that it did not switch off, turn it off without doing any other manipulation. If it is already off, do not attempt to turn it back on for the moment. If the Moto Z2 Play is switched on and wet, you can generate a short circuit and consequently toast the mobile.
Remove detachable components
When the Moto Z2 Play is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it will be required to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Moto Z2 Play
Employing a straw, you need to suck up the water that is contained in your Moto Z2 Play. For this, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Moto Z2 Play, you will have the ability to start drying it.
Dry the Moto Z2 Play
The fourth step is to dry the mobile. For this, we advise you to put it in front of a ventilator several hours. Avoid using méthodes that cause the mobile to heat up or damage the mobile. When it is done, we advise you to leave the Moto Z2 Play in rice for 24 or 48 hours. The rice will consequently absorb the moisture that stays in the Moto Z2 Play.
Reassemble the components and turn on the Moto Z2 Play
When you have completed the prior steps, your Moto Z2 Play should be dry. So now you can try to turn on the Moto Z2 Play. If perhaps this doesn’t function, we advise you to hold out a few days or to bring the Moto Z2 Play to a repairman.
What should not be done in the event that the Moto Z2 Play has fallen into the water
There are several things not to do when your Moto Z2 Play has fallen into the water. The first of all is to try to turn the mobile back on just after. This can kill the Moto Z2 Play. Next, it is highly recommended not to use a heat source to dry the Moto Z2 Play. In fact, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile, do not shake it. Certainly, it could also damage the Moto Z2 Play.
