Whether in the toilet or in a swimming pool, it from time to time happens that the Meizu MX5 is dropped in the water. Nonetheless, it is not because a cellphone has fallen in the water that it’s inevitably dead. In fact, it is possible to redo an Meizu MX5 that has fallen in the water. To do this, it is needed to respect certain steps. People generally have bad reflexes and this is what can damage the Meizu MX5. We will first of all discover the steps to be taken after the Meizu MX5 has fallen into the water. We will discover in the second place the classical mistakes that many people make.
Steps to follow if perhaps your Meizu MX5 fell into the water
If you want to recover your Meizu MX5 in operating order, we recommend that you follow the steps listed below.
Don’t attempt to turn the Meizu MX5 back on after getting out the water
The first thing to do when the Meizu MX5 has fallen into the water is to turn off the cellphone. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Meizu MX5 is started and wet, you may produce a short circuit and as a result toast the cellphone.
Remove detachable components
Once the Meizu MX5 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will be needed to take out the shell, the SIM card, the SD card and the battery if possible. Once performed, put all of these items to dry and proceed to the following step.
Aspire the water that is in your Meizu MX5
By using a straw, you need to suck up the water that is contained in your Meizu MX5. For this, you simply have to glue the straw over areas like buttons and vacuum. Once you believe you have aspired all the water from your Meizu MX5, you will be able to start drying it.
Dry the Meizu MX5
The fourth step is to dry the cellphone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the cellphone to heat up or damage the cellphone. Once it is performed, we recommend you to leave the Meizu MX5 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Meizu MX5.
Reassemble the components and turn on the Meizu MX5
When you have completed the previous steps, your Meizu MX5 should be dry. So now you can try to turn on the Meizu MX5. If this doesn’t do the job, we recommend you to hold out a couple of days or to bring the Meizu MX5 to a repairshop.
What should not be done if perhaps the Meizu MX5 has fallen into the water
There are a number of points not to do when your Meizu MX5 has fallen into the water. The first of all is to try to turn the cellphone back on just after. This can demolish the Meizu MX5. Next, it is strongly recommended not to use a heat source to dry the Meizu MX5. Without a doubt, techniques which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the cellphone, do not shake it. Certainly, it could as well ruin the Meizu MX5.
