Whether in the wc or in a pool, it from time to time occurs that the Meizu MX4 is slipped in the water. On the other hand, it isn’t because a mobile phone has fallen in the water that it’s unavoidably dead. In truth, it is feasible to redo an Meizu MX4 that has fallen in the water. To achieve this, it is important to respect specific actions. People frequently have bad reflexes and this is what can deteriorate the Meizu MX4. We will first discover the methods to be taken after the Meizu MX4 has fallen into the water. We will discover in the 2nd place the common errors that most people make.
Steps to follow if perhaps your Meizu MX4 fell into the water
Whenever you need to restore your Meizu MX4 in operating order, we recommend that you follow the steps below.
Do not attempt to turn the Meizu MX4 back on after getting out the water
The first thing to perform when the Meizu MX4 has fallen into the water is to switch off the mobile phone. In truth, if perhaps it didn’t turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not attempt to turn it back on for the moment. If perhaps the Meizu MX4 is switched on and wet, you can generate a short circuit and as a result toast the mobile phone.
Remove detachable components
When the Meizu MX4 is out of the water and switched off, it will have to be disassembled to the maximum. Meaning that it will be important to take out the shell, the SIM card, the SD card and the battery if possible. When carried out, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Meizu MX4
Utilizing a straw, you must suck up the water that is contained in your Meizu MX4. For this, you just have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Meizu MX4, you will be ready to start drying it.
Dry the Meizu MX4
The fourth step is to dry the mobile phone. For this, we recommend you to put it in front of a ventilator a number of hours. Prevent using procédures that cause the mobile phone to heat up or damage the mobile phone. When it is performed, we recommend you to leave the Meizu MX4 in rice for 24 or 48 hours. The rice will as a result absorb the moisture that remains in the Meizu MX4.
Reassemble the components and turn on the Meizu MX4
When you have completed the prior steps, your Meizu MX4 should be dry. So now you can make an attempt to turn on the Meizu MX4. If this doesn’t work, we recommend you to hang on some days or to bring the Meizu MX4 to a repairshop.
What should not be done if perhaps the Meizu MX4 has fallen into the water
You will find a number of points not to perform when your Meizu MX4 has fallen into the water. The first is to make an attempt to turn the mobile phone back on just after. This can demolish the Meizu MX4. Next, it is highly advised not to use a heat source to dry the Meizu MX4. Without a doubt, techniques such as oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the mobile phone, do not shake it. In fact, it could also damage the Meizu MX4.
