Whether in the toilet or in a swimming pool, it sometimes occurs that the LG Prada 3.0 is dropped into the water. However, it isn’t simply because a phone has fallen into the water that it is unavoidably dead. Certainly, it is possible to redo an LG Prada 3.0 that has fallen into the water. To do this, it is important to respect particular actions. People generally have bad reflexes and this is what can degrade the LG Prada 3.0. We will 1st see the methods to be taken after the LG Prada 3.0 has fallen into the water. We will see in the 2nd place the classical mistakes that a good number of people make.
Steps to follow in cases where your LG Prada 3.0 fell into the water
If perhaps you need to recover your LG Prada 3.0 in working order, we advise that you follow the steps below.
Do not try to turn the LG Prada 3.0 back on after getting out the water
One thing to do when the LG Prada 3.0 has fallen into the water is to shut off the phone. Certainly, in cases where it did not turn off, turn it off without doing any other tricks. In cases where it is already off, do not try to turn it back on for the moment. In cases where the LG Prada 3.0 is started and wet, you might produce a short circuit and consequently toast the phone.
Remove detachable components
When the LG Prada 3.0 is out of the water and switched off, it will have to be disassembled to the highest possible. Meaning that it’ll be important to take away the shell, the SIM card, the SD card and the electric battery if possible. When completed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your LG Prada 3.0
By using a straw, you need to suck up the water that is contained in your LG Prada 3.0. For this, you simply have to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your LG Prada 3.0, you will have the ability to start drying it.
Dry the LG Prada 3.0
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using methods that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the LG Prada 3.0 in rice for 24 or 48 hours. The rice will consequently absorb the wetness that stays in the LG Prada 3.0.
Reassemble the components and turn on the LG Prada 3.0
When you have completed the previous steps, your LG Prada 3.0 should be dry. So now you can make an attempt to turn on the LG Prada 3.0. If this doesn’t perform, we suggest you to hang on a couple of days or to bring the LG Prada 3.0 to a repairshop.
What should not be done in cases where the LG Prada 3.0 has fallen into the water
There are several stuff not to do when ever your LG Prada 3.0 has fallen into the water. The 1st is to make an attempt to turn the phone back on just after. This can demolish the LG Prada 3.0. Next, it is highly recommended not to use a heat source to dry the LG Prada 3.0. Indeed, techniques such as oven or hair dryer heat the components and may degrade them. Finally, to get the water out of the phone, do not shake it. In fact, it could also damage the LG Prada 3.0.
