Whether in the toilet or in a pool, it sometimes occurs that the Lenovo Vibe X2 Pro is slipped into the water. However, it isn’t simply because a phone has fallen into the water that it’s obviously dead. Indeed, it is possible to redo an Lenovo Vibe X2 Pro that has fallen into the water. To get this done, it is necessary to respect particular actions. People typically have bad reflexes and this is what can degrade the Lenovo Vibe X2 Pro. We will first of all see the steps to be taken after the Lenovo Vibe X2 Pro has fallen into the water. We will see in the second place the classical errors that a large number of people make.
Steps to follow if perhaps your Lenovo Vibe X2 Pro fell into the water
If you wish to recover your Lenovo Vibe X2 Pro in working order, we advise that you follow the steps below.
Don’t try to turn the Lenovo Vibe X2 Pro back on after exiting the water
The very first thing to perform when the Lenovo Vibe X2 Pro has fallen into the water is to switch off the phone. Indeed, if perhaps it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Lenovo Vibe X2 Pro is switched on and wet, you can produce a short circuit and consequently toast the phone.
Remove detachable components
When the Lenovo Vibe X2 Pro is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be necessary to take away the shell, the SIM card, the SD card and the electric battery if possible. When carried out, put all of these things to dry and continue to the following step.
Aspire the water that is in your Lenovo Vibe X2 Pro
Utilizing a straw, you will need to suck up the water that is contained in your Lenovo Vibe X2 Pro. For this, you only have to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Lenovo Vibe X2 Pro, you will be ready to start drying it.
Dry the Lenovo Vibe X2 Pro
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Prevent using solutions that cause the phone to heat up or damage the phone. When it is performed, we suggest you to leave the Lenovo Vibe X2 Pro in rice for 24 or 48 hours. The rice will consequently absorb the moisture that remains in the Lenovo Vibe X2 Pro.
Reassemble the components and turn on the Lenovo Vibe X2 Pro
When you have completed the prior steps, your Lenovo Vibe X2 Pro should be dry. So now you can make an attempt to turn on the Lenovo Vibe X2 Pro. In the event that this doesn’t function, we suggest you to hang on a few days or to bring the Lenovo Vibe X2 Pro to a repairman.
What should not be done if perhaps the Lenovo Vibe X2 Pro has fallen into the water
You will find several things not to perform when ever your Lenovo Vibe X2 Pro has fallen into the water. The first of all is to make an attempt to turn the phone back on just after. This can destroy the Lenovo Vibe X2 Pro. Following, it is highly suggested not to use a heat source to dry the Lenovo Vibe X2 Pro. In fact, solutions which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the phone, do not shake it. In fact, it could as well ruin the Lenovo Vibe X2 Pro.