Whether in the toilet or in a swimming pool, it from time to time happens that the Lenovo Phab 2 Pro is slipped into the water. On the other hand, it’s not because a phone has fallen into the water that it is undoubtedly dead. In fact, it is possible to redo an Lenovo Phab 2 Pro that has fallen into the water. To get this done, it is required to respect particular actions. People frequently have bad reflexes and this is what can deteriorate the Lenovo Phab 2 Pro. We will first discover the methods to be taken after the Lenovo Phab 2 Pro has fallen into the water. We will discover in the 2nd place the classical mistakes that a large number of people make.
Methods to follow if perhaps your Lenovo Phab 2 Pro fell into the water
If you wish to recover your Lenovo Phab 2 Pro in working order, we advise that you follow the steps listed below.
Don’t try to turn the Lenovo Phab 2 Pro back on after getting out the water
The first thing to perform when the Lenovo Phab 2 Pro has fallen into the water is to switch off the phone. In fact, if perhaps it didn’t turn off, turn it off without doing any other tricks. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Lenovo Phab 2 Pro is turned on and wet, you can produce a short circuit and as a result toast the phone.
Remove detachable components
When the Lenovo Phab 2 Pro is out of the water and switched off, it will have to be disassembled to the highest possible. This means that it’ll be required to take out the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the following step.
Aspire the water that is in your Lenovo Phab 2 Pro
Employing a straw, you will have to suck up the water that is contained in your Lenovo Phab 2 Pro. For doing it, you simply need to glue the straw over areas like buttons and vacuum. When you think you have aspired all the water from your Lenovo Phab 2 Pro, you will have the capacity to start drying it.
Dry the Lenovo Phab 2 Pro
The fourth step is to dry the phone. For this, we advise you to put it in front of a ventilator several hours. Avoid using solutions that cause the phone to heat up or damage the phone. When it is finished, we advise you to leave the Lenovo Phab 2 Pro in rice for 24 or 48 hours. The rice will as a result absorb the wetness that stays in the Lenovo Phab 2 Pro.
Reassemble the components and turn on the Lenovo Phab 2 Pro
When you have completed the previous steps, your Lenovo Phab 2 Pro should be dry. So now you can try to turn on the Lenovo Phab 2 Pro. In the event that this doesn’t perform, we advise you to wait some days or to bring the Lenovo Phab 2 Pro to a repairman.
What should not be done if perhaps the Lenovo Phab 2 Pro has fallen into the water
You will find several stuff not to perform when ever your Lenovo Phab 2 Pro has fallen into the water. The first is to try to turn the phone back on just after. This can kill the Lenovo Phab 2 Pro. Following, it is highly recommended not to use a heat source to dry the Lenovo Phab 2 Pro. Indeed, methods which include oven or hair dryer heat the components and may deteriorate them. At last, to get the water out of the phone, do not shake it. Indeed, it could as well damage the Lenovo Phab 2 Pro.
