Whether in the wc or in a swimming pool, it sometimes happens that the Lenovo A390T is dropped in the water. Nevertheless, it isn’t simply because a mobile has fallen in the water that it is obviously dead. In fact, it is possible to redo an Lenovo A390T that has fallen in the water. To accomplish this, it is needed to respect specific actions. People typically have bad reflexes and this is what can degrade the Lenovo A390T. We will first discover the methods to be taken after the Lenovo A390T has fallen into the water. We will discover in the second place the classical errors that a large number of people make.
Steps to follow in the event that your Lenovo A390T fell into the water
In the event that you desire to restore your Lenovo A390T in working order, we highly recommend that you follow the steps below.
Don’t attempt to turn the Lenovo A390T back on after exiting the water
One thing to accomplish when the Lenovo A390T has fallen into the water is to switch off the mobile. In fact, in the event that it did not switch off, turn it off without doing any other tricks. In the event that it is already off, do not attempt to turn it back on for the moment. In the event that the Lenovo A390T is switched on and wet, you could make a short circuit and consequently toast the mobile.
Remove detachable components
When the Lenovo A390T is out of the water and turned off, it will have to be disassembled to the highest possible. This implies that it will be needed to take away the shell, the SIM card, the SD card and the battery if possible. When completed, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Lenovo A390T
By using a straw, you will have to suck up the water that is contained in your Lenovo A390T. For this, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Lenovo A390T, you will be able to start drying it.
Dry the Lenovo A390T
The fourth step is to dry the mobile. For this, we suggest you to put it in front of a ventilator a number of hours. Prevent using methods that cause the mobile to heat up or damage the mobile. When it is done, we suggest you to leave the Lenovo A390T in rice for 24 or 48 hours. The rice will consequently absorb the wetness that remains in the Lenovo A390T.
Reassemble the components and turn on the Lenovo A390T
When you have completed the previous steps, your Lenovo A390T should be dry. So now you can try to turn on the Lenovo A390T. If perhaps this does not work, we suggest you to wait a few days or to bring the Lenovo A390T to a repairshop.
What should not be done in the event that the Lenovo A390T has fallen into the water
You will find a number of things not to accomplish when ever your Lenovo A390T has fallen into the water. The first is to try to turn the mobile back on just after. This can demolish the Lenovo A390T. Following, it is highly advised not to use a heat source to dry the Lenovo A390T. Certainly, methods such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the mobile, do not shake it. In fact, it could additionally damage the Lenovo A390T.
