Whether in the wc or in a swimming pool, it occasionally occurs that the Landvo V11 is slipped into the water. Nonetheless, it’s not simply because a telephone has fallen into the water that it is obviously dead. In truth, it is possible to redo an Landvo V11 that has fallen into the water. To get this done, it is required to respect specific steps. People frequently have bad reflexes and this is what can degrade the Landvo V11. We will first discover the techniques to be taken after the Landvo V11 has fallen into the water. We will discover in the 2nd place the common mistakes that the majority of people make.
Steps to follow if perhaps your Landvo V11 fell into the water
If you desire to restore your Landvo V11 in operating order, we advise that you follow the steps below.
Do not attempt to turn the Landvo V11 back on after getting out the water
The first thing to perform when the Landvo V11 has fallen into the water is to shut off the telephone. In truth, if perhaps it didn’t turn off, turn it off without doing any other tricks. In cases where it is already off, do not attempt to turn it back on for the moment. In cases where the Landvo V11 is started and wet, you may make a short circuit and therefore toast the telephone.
Remove detachable components
Once the Landvo V11 is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will probably be required to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and proceed to the next step.
Aspire the water that is in your Landvo V11
Utilizing a straw, you must suck up the water that is contained in your Landvo V11. For this, you only need to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Landvo V11, you will have the ability to start drying it.
Dry the Landvo V11
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Avoid using solutions that cause the telephone to heat up or damage the telephone. Once it is done, we advise you to leave the Landvo V11 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that remains in the Landvo V11.
Reassemble the components and turn on the Landvo V11
When you have completed the prior steps, your Landvo V11 should be dry. So now you can try to turn on the Landvo V11. In the event that this doesn’t function, we advise you to hold out some days or to bring the Landvo V11 to a repairshop.
What should not be done if perhaps the Landvo V11 has fallen into the water
You will find a number of points not to perform when your Landvo V11 has fallen into the water. The first is to try to turn the telephone back on just after. This can demolish the Landvo V11. Following, it is strongly suggested not to use a heat source to dry the Landvo V11. Certainly, techniques such as oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. In fact, it could additionally ruin the Landvo V11.
