Whether in the toilet or in a swimming pool, it from time to time happens that the Huawei Y6 is slipped into the water. Nevertheless, it is not because a telephone has fallen into the water that it is unavoidably dead. Indeed, it is feasible to redo an Huawei Y6 that has fallen into the water. To get this done, it is necessary to respect specific actions. People frequently have bad reflexes and this is what can damage the Huawei Y6. We will 1st discover the methods to be taken after the Huawei Y6 has fallen into the water. We will discover in the secondary place the classical mistakes that the majority of people make.
Methods to follow if your Huawei Y6 fell into the water
If perhaps you need to restore your Huawei Y6 in operating order, we advise that you follow the steps listed below.
Do not try to turn the Huawei Y6 back on after getting out the water
One thing to perform when the Huawei Y6 has fallen into the water is to shut off the telephone. Indeed, if it didn’t switch off, turn it off without doing any other tricks. If it is already off, do not try to turn it back on for the moment. If the Huawei Y6 is started and wet, you can make a short circuit and therefore toast the telephone.
Remove detachable components
When the Huawei Y6 is out of the water and switched off, it will have to be disassembled to the maximum. This implies that it will probably be necessary to remove the shell, the SIM card, the SD card and the battery if possible. When done, put all of these things to dry and continue to the following step.
Aspire the water that is in your Huawei Y6
Utilizing a straw, you will need to suck up the water that is contained in your Huawei Y6. For doing it, you only need to glue the straw over areas like buttons and vacuum. When you believe you have aspired all the water from your Huawei Y6, you will be able to start drying it.
Dry the Huawei Y6
The fourth step is to dry the telephone. For this, we suggest you to put it in front of a ventilator a number of hours. Avoid using methods that cause the telephone to heat up or damage the telephone. When it is performed, we suggest you to leave the Huawei Y6 in rice for 24 or 48 hours. The rice will therefore absorb the wetness that remains in the Huawei Y6.
Reassemble the components and turn on the Huawei Y6
When you have completed the previous steps, your Huawei Y6 should be dry. So now you can try to turn on the Huawei Y6. If perhaps this does not perform, we suggest you to wait a few days or to bring the Huawei Y6 to a repairman.
What should not be done if the Huawei Y6 has fallen into the water
You will find a number of stuff not to perform when ever your Huawei Y6 has fallen into the water. The 1st is to try to turn the telephone back on just after. This can destroy the Huawei Y6. Following, it is highly advised not to use a heat source to dry the Huawei Y6. In fact, techniques which include oven or hair dryer heat the components and may damage them. At last, to get the water out of the telephone, do not shake it. Indeed, it could as well damage the Huawei Y6.
