Whether in the wc or in a swimming pool, it sometimes happens that the Huawei ShotX is dropped in the water. Even so, it isn’t because a telephone has fallen in the water that it’s unavoidably dead. In fact, it is feasible to redo an Huawei ShotX that has fallen in the water. To achieve this, it is important to respect particular steps. People frequently have bad reflexes and this is what can degrade the Huawei ShotX. We will 1st discover the techniques to be taken after the Huawei ShotX has fallen into the water. We will discover in the 2nd place the classical mistakes that most people make.
Methods to follow if your Huawei ShotX fell into the water
Whenever you wish to recover your Huawei ShotX in working order, we recommend that you follow the steps listed below.
Don’t try to turn the Huawei ShotX back on after getting out the water
The very first thing to do when the Huawei ShotX has fallen into the water is to switch off the telephone. In fact, if it didn’t switch off, turn it off without doing any other tricks. In the event that it is already off, do not try to turn it back on for the moment. In the event that the Huawei ShotX is turned on and wet, you may make a short circuit and therefore toast the telephone.
Remove detachable components
Once the Huawei ShotX is out of the water and switched off, it will have to be disassembled to the maximum. This means that it will be important to remove the shell, the SIM card, the SD card and the battery if possible. Once finished, put all of these items to dry and proceed to the next step.
Aspire the water that is in your Huawei ShotX
Employing a straw, you have got to suck up the water that is contained in your Huawei ShotX. For doing it, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Huawei ShotX, you will have the capacity to start drying it.
Dry the Huawei ShotX
The fourth step is to dry the telephone. For this, we advise you to put it in front of a ventilator a number of hours. Prevent using solutions that cause the telephone to heat up or damage the telephone. Once it is completed, we advise you to leave the Huawei ShotX in rice for 24 or 48 hours. The rice will therefore absorb the wetness that stays in the Huawei ShotX.
Reassemble the components and turn on the Huawei ShotX
When you have completed the previous steps, your Huawei ShotX should be dry. So now you can try to turn on the Huawei ShotX. If perhaps this does not do the job, we advise you to wait a couple of days or to bring the Huawei ShotX to a repairshop.
What should not be done if the Huawei ShotX has fallen into the water
There are a number of stuff not to do when ever your Huawei ShotX has fallen into the water. The 1st is to try to turn the telephone back on just after. This can kill the Huawei ShotX. Next, it is strongly suggested not to use a heat source to dry the Huawei ShotX. Indeed, methods which include oven or hair dryer heat the components and may degrade them. At last, to get the water out of the telephone, do not shake it. Certainly, it could likewise ruin the Huawei ShotX.
