Whether in the toilet or in a pool, it sometimes happens that the Huawei Ascend Y330 is dropped in the water. On the other hand, it isn’t because a phone has fallen in the water that it’s inevitably dead. In truth, it is possible to redo an Huawei Ascend Y330 that has fallen in the water. To accomplish this, it is important to respect particular steps. People often have bad reflexes and this is what can damage the Huawei Ascend Y330. We will first of all discover the techniques to be taken after the Huawei Ascend Y330 has fallen into the water. We will discover in the 2nd place the classical mistakes that many people make.
Methods to follow in the event that your Huawei Ascend Y330 fell into the water
If you need to restore your Huawei Ascend Y330 in working order, we suggest that you follow the steps below.
Do not try to turn the Huawei Ascend Y330 back on after getting out the water
The first thing to accomplish when the Huawei Ascend Y330 has fallen into the water is to switch off the phone. In truth, in the event that it did not turn off, turn it off without doing any other manipulation. If perhaps it is already off, do not try to turn it back on for the moment. If perhaps the Huawei Ascend Y330 is switched on and wet, you may create a short circuit and therefore toast the phone.
Remove detachable components
Once the Huawei Ascend Y330 is out of the water and turned off, it will have to be disassembled to the highest possible. This means that it will probably be important to take out the shell, the SIM card, the SD card and the battery if possible. Once done, put all of these things to dry and continue to the next step.
Aspire the water that is in your Huawei Ascend Y330
Employing a straw, you have got to suck up the water that is contained in your Huawei Ascend Y330. For this, you just have to glue the straw over areas like buttons and vacuum. Once you think you have aspired all the water from your Huawei Ascend Y330, you will be ready to start drying it.
Dry the Huawei Ascend Y330
The fourth step is to dry the phone. For this, we suggest you to put it in front of a ventilator several hours. Avoid using procédures that cause the phone to heat up or damage the phone. Once it is completed, we suggest you to leave the Huawei Ascend Y330 in rice for 24 or 48 hours. The rice will therefore absorb the moisture that stays in the Huawei Ascend Y330.
Reassemble the components and turn on the Huawei Ascend Y330
When you have completed the prior steps, your Huawei Ascend Y330 should be dry. So now you can try to turn on the Huawei Ascend Y330. In the event that this does not work, we suggest you to hang on a couple of days or to bring the Huawei Ascend Y330 to a repairshop.
What should not be done in the event that the Huawei Ascend Y330 has fallen into the water
There are several points not to accomplish when ever your Huawei Ascend Y330 has fallen into the water. The first of all is to try to turn the phone back on just after. This can destroy the Huawei Ascend Y330. Following, it is strongly recommended not to use a heat source to dry the Huawei Ascend Y330. Indeed, methods which include oven or hair dryer heat the components and may damage them. Finally, to get the water out of the phone, do not shake it. Indeed, it could as well damage the Huawei Ascend Y330.
